ASRock started introducing small form factor (SFF) HTPCs last year. Their first play in the market was an ION based Atom nettop, and it could best be termed as an entry-level machine. While being a good fit as a secondary HTPC, it failed to satisfy the power users. Absence of HD audio bitstreaming and lack of processing power for many common HTPC tasks were important reasons. In an effort towards alleviating these concerns, ASRock introduced a mainstream SFF HTPC a couple of months back, namely, the Core 100. With a Core i3 mobile processor combined with the integrated Arrandale IGP, things started to look good for the SFF HTPC space. We had unreserved praise for the Core 100, but the Intel HD Graphics did have some shortcomings for the purists in terms of support for the latest Blu-Ray features and potential for gaming.

The Vision 3D was announced at the 2010 Computex show in the first week of June. The aim of this product was to make a foray into the high end HTPC space by offering cutting edge technology such as 3D movie playback and 3D gaming to the consumers. The initial plan was to use a GeForce 3xxM or 4xxM as the GPU inside the Vision 3D. Had ASRock rushed the release of the HTPC and gone with the 3xxM card, the unit would have been DOA due to the lack of HD audio bitstreaming. Instead of rushing to the market with a half-baked product, ASRock wisely decided to wait for nVidia to get its HTPC game straight. What we have on our hands now is a HTPC very similar to the Core 100, with the additional power of the GeForce 425M replacing the Intel IGP for the graphics duties.

What makes the Vision 3D a high end unit? For starters, it is the first pre-built HTPC to support HD audio passthrough as well as Blu-Ray 3D playback with HDMI 1.4a support. It is evident that this HTPC will remain future proof for quite some time to come. 3D technology is yet to become mainstream, with displays still being priced out of reach of the average consumer. ATI and Intel are yet to bring HDMI 1.4a support in their GPUs. These facts combine to make ASRock a pioneer of sorts in the SFF HTPC field. The closest competition to the ASRock Vision 3D comes in the form of the Dell Zino HD. However, even the highest end configuration of the Zino HD doesn't support 3D Blu-Ray playback. Based plainly on the specs, it looks like all the bases are covered for the consumer on the leading edge who doesn't want to mess around with building his own HTPC. Does the Vision 3D deliver on its promise? That is what we are set to find out in the course of this review.

Unboxing Impressions
Comments Locked

51 Comments

View All Comments

  • ProDigit - Sunday, October 3, 2010 - link

    Looks interesting at first, but I don't much like nvidia graphics cards, and the WD drive.
    WD drives are known to break right after their warranty expires when using them a lot.

    The only good about the nvidia card is that it could be set up to work with CUDA (CPU + GPU in parrallel); although cuda now also supports most ATI/AMD cards.

    The price of this setup is quite on the high end. If it wasn't for 3D vision, I'd say this computer would go for no more than $699. With 3D, I'd say $799 max.
    I personally don't care if it supports 3D or not, since I have no monitors that support this resolution. So for me it's only worth $599.
  • ProDigit - Sunday, October 3, 2010 - link

    They should have gone with a Toshiba drive instead. Yes, WD has faster continuous write and read speeds, but Toshiba is much better in IO performance.
    An OS like Windows 7 would boot faster with Toshiba, than with WD, and would run significantly cooler too!
    WD is absolutely NOT the best drive they could have chosen! The cheapest perhaps yes.
  • ganeshts - Sunday, October 3, 2010 - link

    Looks like the WD Scorpio Black is as good as the Momentus XT from Seagate (except for the Disk Capture benchmark):

    http://www.storagereview.com/western_digital_scorp...

    So, from a price-performance ratio, it makes sense to go with WD.

    I have also mentioned in my review that a mini-PCIE SSD for the boot drive would have been good :)
  • sprockkets - Sunday, October 3, 2010 - link

    The best notebook drives were made by IBM, and now Hitachi. Whether that still is the case, who knows.
  • Zok - Sunday, October 3, 2010 - link

    CUDA is not supported on ATI/AMD cards. DirectCompute and OpenCL are, however, supported by both.
  • LtGoonRush - Sunday, October 3, 2010 - link

    Studies of both operating disk populations and drives sent in for data recovery show that no brand of drives is measurably more or less reliable than others, with the notable exception of the Seagate model ranges affected by their firmware bugs. It's also been conclusively proven that drive usage doesn't affect failure rates; lightly loaded and heavily loaded drives fail at the same rate. It's true that a failing drive will have its death hastened by heavy load, but you shouldn't be using a drive that's failing anyway, it should be replaced with the first SMART error it logs. The WD Scorpio Black drives in particular are the fastest notebook HDDs available, balancing high throughput with excellent seek times (Seagate drives have always had abysmal seek performance). It's also a little silly to complain about heat when we're talking about drives with sub-4W PEAK power draw.
  • chrnochime - Sunday, October 3, 2010 - link

    great job for correcting him without making it more obvious how wrong he is. I would've not sugarcoat it as much as you did though heh.
  • lexluthermiester - Sunday, October 3, 2010 - link

    Seriously? Not liking Nvidia, well that is just personal preference. You not having a TV/Monitor that supports what this system can put out is not the fault of the maker or the system itself, it your problem. But bashing WD? They make the finest hard drives in the world and there are certainly worse hard drive makers. Now I'm not going to be low class and name names, but really? And if you don't like this little system, then don't buy it, but don't bash something that certainly has usefulness to a certain audience of users and at a very fair price.
  • Parhel - Sunday, October 3, 2010 - link

    False. WD drives are not "known" for high failure rates. All drive manufacturers compare about evenly in most areas. WD is one of, if not the, best choice out there.
  • Samus - Sunday, October 3, 2010 - link

    I was a WD fan in the 90's and after the 7200.7's came out and they ditch the wetsuits I became a die-hard Seagate fan because of the 7200.7's legendary reliability, low cost, 5-year warranty and 'decent' performance. These were all big selling points during an era where the Deathstar 75GXP rocked the storage industry with what some circles were calling a "definitive" failure rate within the warranty period.

    The Seagate drives just worked. However, recently I've had a lot of Seagate 7200.10 and 7200.11 drives giving me SMART errors, specifically reallocated sector counts. They also run hot compared to my new WD Blue 1TB drive and they're all mounted in the same cage. A few years ago I had a 1.5TB Seagate I had to flash to CC1G because of the firmware 'recall' which was definitely a quality control concern. I didn't loose data, but I know somebody who did, one day their drive was just blank. We flashed the firmware and his data was back, but the drive failed after a few months without warning, just spun up and clicked. Tried freezing it. No dice.

    Seems like WD is taking the quality/reliability crown, where as they've always had the performance crown...but performance wasn't as important to me as making sure the drive would work for 3-5 years without any issues.

    I'd consider a Hitachi in the future, but will probably continue to stick with Seagate and WD drives. Considering how many dead Samsung and Fujitsu drives I've pulled and replaced from friends' desktop and laptop's over the years, it's a no-brainier to stay the hell away from those. Toshiba I have mixed feelings about because over the past 20-years, I just didn't care much for their laptops. Hypocritically, I love Thinkpad's but when IBM had those 75GXP failures, I didn't change my mind about their laptops, and still think they make the best laptop's out there. Ironically things are different now, because Hitachi makes the hard drives and Lenovo makes the Thinkpad's. IBM has little to do with either now.

Log in

Don't have an account? Sign up now