ADATA this week has introduced its first aftermarket cooler for M.2-2280 SSDs. The XPG Storm is meant to ensure stable performance with the latest drives under high loads, while also adding some visual effects via its integrated RGB LEDs.

The ADATA XPG Storm features a large, ten fin anodized aluminum heatsink painted to resemble copper. The heatsink in turn is cooled by an Sunon MF20100V1-10000-A99 20-mm fan, a small-but-powerful fan that can spin at up to 16,500 RPM (see detailed specs of the unit below). Overall the cooler is 2.4 centimeters thick and is among the largest cooling devices for M.2 SSDs launched to date.

While dimensions of the XPG Storm will affect its compatibility with small form-factor PCs (e.g., Mini-ITX motherboards with an M.2 slot on the backside), the maximized surface area means better heat dissipation, further reducing any remaining thermal throttling under high loads. ADATA does not quantify advantages of its XPG Storm (it only says it makes SSDs 25% cooler, but that is not a very precise valuation), but according to EKWB, a passive heatsink can reduce controller temperature by 8-10°C, or even more with appropriate airflow. Since the XPG Storm has its own fan, expect it to perform a bit better than passive coolers. Meanwhile, keep in mind that the noise generated by the aforementioned 16,500 RPM fan is speced at 25 dBa, which is noticeable.

Besides just cooling SSDs, the ADATA XPG Storm is an accessory that adds style to a modern gaming PC. The shroud of the XPG Storm’s cooler features RGB LEDs that support external 4-pin RGB controllers, as well as ASUS Aura Sync, GIGABYTE RGB Fusion, and MSI Mystic Light Sync applications. The fan can be connected to a system fan header on a motherboard, or directly to a PSU using a an appropriate adapter.

The vast majority of high-performance SSDs these days use M.2 form-factor because of PCIe interface and broad compatibility with all types of desktop, laptop and even hybrid computers. However, M.2 drives have a drawback that affects their performance occasionally: they are hard to cool down. Modern SSD controllers contain multiple computing cores to perform rather intensive mathematical operations while using ECC based on LDPC algorithms in order to work with contemporary NAND flash memory, all the while the NAND dies themselves also produce heat of their own. As a result, high-end drives in particular have been known to throttle some in heavy write scenarios, especially in systems with poor airflow.

Manufacturers of SSDs naturally try to tackle heat issues by equipping their drives with thermal pads (Samsung) or heatsinks (ADATA, Plextor), but since the majority of M.2 SSDs come without any cooling, the market of custom cooling solutions for such drives is expanding. Over the past 12 months we have seen aluminium M.2 coolers from Alphacool (passive and liquid cooled) and EKWB (passive), whereas Silverstone is selling aftermarket thermal pads. As it appears, ADATA decided to take aftermarket cooling of its M.2 SSDs into its own hands, thus offering a comprehensive service to its demanding clients as well as increasing its revenue and profits.

ADATA XPG Storm at a Glance ASTORM-C
Bearing Type Vapo-Bearing
Fan Diameter 20 mm (?)
RPM 16,500 RPM ± 15%, non-PWM
Airflow 1.9 CFM (at 16,500 RPM)
Noise level 25 dBA (max)
Fan life unknown
RGB Compatibility External controllers
ASUS Aura Sync
MSI Mystic Light Sync
Dimensions 81.5 × 24.55 × 23.1 mm
Voltage 12 V, 80 mA
MSRP $29.99
Check Availability Amazon

ADATA will start selling its XPG Storm cooler for $29.99 starting early next month. The unit will be covered by a one-year warranty.

Related Reading:

Comments Locked


View All Comments

  • xchaotic - Wednesday, November 22, 2017 - link

    16500rpm, why would anyone want to do that to their ears?
    Might be cheaper and faster to just buy two SSDs with no cooler and let them throttle sometimes? (in a given budget)?
  • DanNeely - Wednesday, November 22, 2017 - link

    It's the same reason why 1U servers are obscenely loud; with a fan that's only an inch in size you need to run them incredibly fast to move a meaningful amount of air.

    The fact that even at that speed its only moving 2 CFM says it all.
  • IGTrading - Thursday, November 23, 2017 - link

    It's good to see all the useful technical info being posted here, but does anybody have any technical details / diagrams on this new "Vapo-Bearing" technology ?
  • PeachNCream - Thursday, November 23, 2017 - link

    Yeah, it heats up a liquid that contains nicotine and other chemicals for flavor that you basically inhale. Some people do that instead of smoking cigarettes so it would make sense that cooling fans are getting into it too.
  • Valantar - Thursday, November 23, 2017 - link

    2cfm for a 20mm radial fan is amazing. Then again, 16500 rpm is also amazing(ly loud and completely unsuited for home use).
  • satai - Wednesday, November 22, 2017 - link

    Exactly my thoughts.
    25dB just to cool m.2? But there are RGB LEDs included so I guess it's OK to be loud...
  • stephenbrooks - Wednesday, November 22, 2017 - link

    Although I became suspicious at "aluminum heatsink painted to resemble copper"
  • MrSpadge - Wednesday, November 22, 2017 - link

    What a bad product, IMO! They spend money on bling-bling lights, but do not even include PWM control or its own temperature sensor for the fan? Let the fan idle under regular loads & idle (the heat sink will suffice) and only spin up if needed.

    And to nitpick:
    "it only says it makes SSDs 25% cooler, but that is not a very precise valuation"
    It is precise but almost meaningless ;)
  • Samus - Wednesday, November 22, 2017 - link

    That’s my complaint too. This is overall not a bad idea, and I think people need to understand that 20mm fans nominal speeds are anywhere from 7k to 20k rpm. And they aren’t very loud. At 16k it’s probably near silent. At 20k most don’t even crack 31dB. They likely settled on 16k to extend service life.

    But PWM control could focus the RPM with thermal demand. There is no need for it to run at 16k all the time. The lack of PWM implies this is a poor quality fan, not something out of a server like a Sunon.
  • LordanSS - Wednesday, November 22, 2017 - link

    Yeah the idea isn't bad. Personally tho, I'd get a M.2 heatsink from Alphacool or EKWB, grab one of those tiny Noctua fans (they have ones rated for 13dB), a little bit of improvisation and voila...

Log in

Don't have an account? Sign up now