Software: Corsair Utility Engine (CUE) 

Much like all of Corsair's advanced keyboards and mice, the Strafe RGB is making use of the Corsair Utility Engine (CUE) software. The CUE software is exactly the same between all of Corsair's devices, adapting to the features available on the device. For example, the software will offer options for RGB lighting programming with the Strafe RGB, but it will only allow adjustments of the illumination intensity level with a vanilla Strafe keyboard that only has red LEDs. After it has been installed, it identifies any and all of the supported peripherals, allowing their individual or synchronized programming. Synchronized programming is especially useful if more than one of Corsair's peripherals are present, such as a mouse, since it allows all of the devices to switch their profiles and modes concurrently.

The main page of the software is the profiles section that, as the name suggests, allows for the programming of profiles and modes. Modes are like sub-profiles, as they can include every option a full profile does; the only difference is that you can set the profiles to start automatically once a specific program is launched, but you cannot do the same for modes. As an example of the potential usage, you can have the keyboard to switch into a specific profile when a game launches and still have several keyboard modes programmed in that profile for in-game switching.

When programming a mode, the user can access three major tabs: Assignments, Performance, and Lighting. The Assignments tab allows for the programming or remapping of every key on the keyboard, including the two keys at the top right corner. The Actions List button brings up all the actions that the user has programmed (macros, timers, etc.) and they can be drag-and-dropped on any key. Keys can also be repurposed to switch modes and/or profiles.

The performance section is rather dull, as the user can only specify what actions the keyboard lock key will block. In contrast, the Lighting section is very complex. In this section you can program the lighting of each key individually. It's also possible to create key groups and assign lighting effects to individual keys, groups of keys, or the entire keyboard.

Fifteen colors are available at the bottom-left side of the tab for quick assignment, and these can be configured/replaced by simply right-clicking on them. The user can select any of the 16.8 million colors of the RGB scale, or even enter the color as HTML code. For those that do not wish to delve too deep with the lighting settings but still want to have something more than a static color, if the "Standard settings" option is selected, the software ignores the list of imported/programmed lighting effects and offers a short list of pre-programmed full keyboard effects instead.


The Actions section allow for the programming of many advanced options, such as macros, timers, and even mouse movements. The actions programmed here can be inserted into keys via the assignments tab. If you had actions programmed using another Corsair device before, or if you upgrade to another device, the CUE software can still use the same programmed actions and insert them into the new/other device.

There are eight different categories of advanced actions: Macros, Text, Keystroke, Shortcut, DPI, Timer, Mouse, and Media Control. The simplest are the Shortcuts and the Media Control sections. As the names suggest, Shortcuts will allow a single key to launch an application and Media Controls are the eight most common playback and volume control options.

The macro programming capabilities of the software are surprisingly good. Aside from the keystrokes and delays, the CUE software can also record the relative mouse movements and mouse clicks. Unfortunately, it cannot record the absolute mouse position at the time of this review, meaning that macros cannot be programmed to click on specific coordinates on the screen regardless of the current position of the pointer. Given that the software supports the insertion of absolute screen coordinates manually, their recording when programming the macro itself may be introduced into a future version of the software. There are more options, such as the ability to set a macro to terminate and/or repeat the Macro under specific conditions and the option to add a second macro to start after the current macro is finished.

The Text and Keystrokes sections are less complicated. In the Text section, the user can enter bodies of text that will be typed once the specific key has been pressed. These actions are useful for the quick insertions of common chat messages, signatures, etc. The Keystrokes section can be used to create keystrokes using single or multiple keys (e.g. CTRL+C, Shift+CTRL+X, etc.). It is very similar to the simple remapping section, with the exception that the user can program the actions to repeat and even adjust the delay between the repeats. This can be especially useful in games when "rapid fire" by simply holding down a key is not allowed. Using Keystrokes, it is possible to circumvent this, saving gamers from having to hectically press a button for the rapid repeating of the action.

The DPI section is not complex but it certainly is very interesting. The CUE software can adjust the DPI resolution of your mouse in multiple ways, allowing the switching between DPI stages or the initiation of a temporary "Sniper mode". These actions can be programmed on keyboard keys or, if you own one of Corsair's programmable mice, on a key of the mouse. This section however is not compatible with all mice, even if the action is programmed on a keyboard key, and will most likely be available only to those using a Corsair Gaming mouse.

The Timer section allows the user to program timers that can play sounds, initiate lighting effects, or execute other actions (e.g. macros) once the countdown ends. The minimum resolution of the countdown is 1 second. Finally, the Mouse section allows the remapping of the keyboard's keys to emulate simple mouse clicks and scrolling. We should also add that a lighting effect can be added into each action and can be set to start when the specific action initiates or ends.

In the Lighting section of the CUE software, the user can program specific lighting effects than can then be used with individual keys or groups of keys, or to be used when programming actions. There are four main effects: Solid, Gradient, Ripple, and Wave. Solid and Gradient effects can be used on individual keys but the Ripple and Wave effects require groups of keys, although they can still be linked to actions. The minimum effect time is one second, but there are ten subdivisions when programming a full effect, meaning that the actual time of the full effect can be reduced down to 100ms. The user can insert any number of points into a single effect and is able to adjust the color and intensity of each point individually. That, alongside with the effect-specific option (e.g. duration, velocity, etc.) and the ability to choose practically any color of the visible spectrum allows the users to create nearly any lighting effect conceivable.

The last main section of the CUE software, the Settings section, holds details about the device and the software settings. From this section, the user can select different layouts, update the firmware of the keyboard, and adjust the on screen display (OSD) options and basic software settings. The user can also set the media keys to work with specific media players, allowing direct control of their interface even in-game. The polling rate of the Strafe RGB is also adjustable from here, even if there is no physical switch on the keyboard.  Finally, the Support tab holds basic information about your system, details on how to receive technical support, access to the forum, and where to find the very long user manual (I suggest you download that, as you will most likely need it). It is also capable of generating an advanced system report, which we imagine will be rather useful if there is a problem that requires technical support to know specific details about the user's system.

The Corsair Strafe RGB Mechanical Keyboard Quality and Per-Key Actuation Force Testing
Comments Locked


View All Comments

  • Flunk - Tuesday, March 15, 2016 - link

    The funniest thing about how mechanical switches are marketed is that the activity that they affect the most is typing. Sure, maybe they'll help your gaming ability, but they've been proven to improve typing speed.
  • pjcamp - Tuesday, March 15, 2016 - link

    Consequently, one would expect more blue switches.

    I'm guessing the calculation is that gamers can be expected to be more persuadable to part with their money than businesses.
  • Valantar - Tuesday, March 15, 2016 - link

    Blue switches are better than brown for typing only in that they make your computer sound like a typewriter. 65cN is too stiff, and the noise - especially in any shared office environment - would quickly become a nuisance. Browns are the way to go, unless you specifically want noisy keys and will be using them in an environment where that doesn't bother others. I just wish they'd follow up the Red Silent switches with a Brown Silent one. I'd buy that in a heartbeat.
  • rxzlmn - Wednesday, March 16, 2016 - link

    I was under the same impression that Blues and clicky switches in general were best for typing, and that I also prefer to use them. I used a keyboard with brown switches and then with blue ones. Well, after using and getting used to a keyboard with black switches and having tried one with Reds, I can say I was very wrong. I type faster and better on the Blacks, and if I had a reason to buy a new keyboard I would get one with Reds.

    I tried the old MX Blue keyboard again, I can't do it.
  • psiclonehi - Tuesday, April 25, 2017 - link

    I didn’t find it improved my typing speed…in fact, it hindered it. The keys were so much closer together than regular keyboards, I kept mistyping things. I returned this junk shortly thereafter. Sure, I could spend time trying to get used to it, and I wanted to…but then realized why would I bother, when I still have to keep bouncing between that keyboard and other ones elsewhere all the time.
  • TEAMSWITCHER - Tuesday, March 15, 2016 - link

    Does anyone really like these keyboards? When I look at them, all I can see is a SUPER FAT KEYBOARD, very only school keys with HUGE key travel that slows typing to crawl. I don't get it.
  • rtho782 - Tuesday, March 15, 2016 - link

    Just because there is a long travel doesn't mean you have to bottom out the key to type.

    Personally I only like MX Blues, as the clicky actuation point is nicer both for gaming and typing imho, but you only bottom out if you are key pounding.
  • Teknobug - Tuesday, March 15, 2016 - link

    The K70, Strrafe, Razer Blackwidow, Thermaltake Poseidon Z and Azio MGK1 are actually fairly small compared to a lot of keyboards. Going from a Logitech to an Azio the keys feel taller which take a little getting used to (hence the keys stick out of the body rather than plush or halfway out the body, but I"m a 75-80wpm typist and I have no problems with the Azio brown.
  • ddriver - Tuesday, March 15, 2016 - link

    I am using an old, even ancient keyboard, an olivetti that came with an expressive server back in the days when my PC was a high end 386 with 4 megs of ram. I've tried hundreds of keyboards since then and I never liked any of them. That's why I still use this one, DIN to PS2 and PS2 to USB converters. There is chance some of the 250+$ mechanical keyboards would offer comparable experience, but at that cost and their ridiculous look, I'd rather keep the old one, it works great, awesome experience and feel.
  • ddriver - Tuesday, March 15, 2016 - link

    Also, it has the extended return key, which is very rare to find on a keyboard with good switches.

Log in

Don't have an account? Sign up now