AMD FX-8320E Overclocking

Sometimes looking at CPU overclocking performance is not that relevant. Each CPU ends up being different, and the plural of anecdote is not ‘data’. At some point it might be useful to sample 100+ CPUs of the same type and gain a proper scientific distribution of overclocks, but even then a sample size of 100 is quite small. So our single point in the ether might not matter too much, but the end result this time around was more than interesting.

To put this into perspective, our recent CPU samples here at AnandTech have been bottom of the barrel for our 24/7 validation methods. Our current i7-5960X does 4.4 GHz on a good day, and our fall-back stock testing model only does 4.2 GHz. Similarly we had an i7-4770K that only did 4.1 GHz – that was particularly shocking. Our last true good overclocker was a Sandy Bridge i7-2600K that did 5.3 GHz with a little push but sat at 5.1 GHz comfortably. Since then, horse plop is a nice word to describe it. However, that changed with our FX-8320E sample when paired with our AM3+ CPU test bed, the 990FX Extreme9.

As the voltage was increased, the frequency increased. It kept going, and going, and going. The Nepton 140XL CPU liquid cooler from CoolerMaster kept the temperature low (when I remembered to plug the fan in), but on the other hand the power started to rise. Almost every bump in frequency required an adjustment in voltage, but the increases were small.

At the end of the day, we rose from a 3.2 GHz base frequency all the way up to 4.8 GHz, a +50% overclock.


Our standard overclocking methodology is as follows. We select the automatic overclock options and test for stability with PovRay and OCCT to simulate high-end workloads. These stability tests aim to catch any immediate causes for memory or CPU errors.

For manual overclocks, based on the information gathered from previous testing, starts off at a nominal voltage and CPU multiplier, and the multiplier is increased until the stability tests are failed. The CPU voltage is increased gradually until the stability tests are passed, and the process repeated until the motherboard reduces the multiplier automatically (due to safety protocol) or the CPU temperature reaches a stupidly high level (100ºC+). Our test bed is not in a case, which should push overclocks higher with fresher (cooler) air.

Overclock Results

The voltage at 4.8 GHz ran at an alarming 1.550 volts, and the system was stable during our testing when we rested all the benchmarks at this new marker. For 50% extra MHz, our POV-Ray scores jumped from 1212 to 1806, a near 50% jump as well. The only thing that jumped more than 50% was the power consumption. We measured an 86W idle to peak delta when at stock, but the final power was an additional +176W, or +205%, for a total 262W all in, pushing it above the FX-9590's TDP.

Actually in our graphs over the next few pages, the FX-9590 proved to be the best competition when overclocked. That being said, if I were using the CPU 24/7, 1.550 volts at 4.8 GHz would not be the best place to leave it. At 4.5 GHz the CPU only needed 1.375 volts for only a +79W power consumption. Depending on the power delivery of the motherboard, perhaps another couple of notches as well. But all four modules at 4.8 GHz was pretty much unexpected. As always, your mileage may vary.

One argument for our good overclocking sample takes many prongs. A cynic might suggest that this was pre-binned to give a good result, however our past samples from AMD has nothing to suggest that this was particularly special. Karma might suggest that it was just ‘our time’ to get a good sample. A pragmatist would suggest that the FX-8320E is a particularly highly binned part to begin with, and the 30W saving from the regular FX-8320 for only 300 MHz loss might work in its favor depending on how far the voltage curve goes. Again, as stated at the top of this page, it is hard to pin it down without a representative overclocking sample.

Test Setup

Test Setup
Processor AMD FX-8320E
4 Modules, 8 Threads, 3.2 GHz, 4.0 GHz Turbo
Motherboards ASRock 990FX Extreme9
Cooling Cooler Master Nepton 140XL
Power Supply OCZ 1250W Gold ZX Series
Corsair AX1200i Platinum PSU
Memory G.Skill RipjawsZ 4x4 GB DDR3-1866 9-11-9 Kit
Memory Settings XMP
Video Cards MSI GTX 770 Lightning 2GB (1150/1202 Boost)
Video Drivers NVIDIA Drivers 337
Hard Drive OCZ Vertex 3 256GB
Optical Drive LG GH22NS50
Case Open Test Bed
Operating System Windows 7 64-bit SP1

We are using our ASRock 990FX Extreme9 for testing consistency and comparison, despite AMD sampling the MSI 970 Gaming with this review unit. The motherboard and BIOS can affect the performance quite dramatically, and this keeps our numbers comparable to each other.

Many thanks to...

We must thank the following companies for kindly providing hardware for our test bed:

Thank you to OCZ for providing us with PSUs and SSDs.
Thank you to G.Skill for providing us with memory.
Thank you to Corsair for providing us with an AX1200i PSU.
Thank you to MSI for providing us with the NVIDIA GTX 770 Lightning GPUs.
Thank you to Rosewill for providing us with PSUs and RK-9100 keyboards.
Thank you to ASRock for providing us with some IO testing kit.
Thank you to Cooler Master for providing us with Nepton 140XL CLCs.

Load Delta Power Consumption

Power consumption was tested on the system while in a single MSI GTX 770 Lightning GPU configuration with a wall meter connected to the OCZ 1250W power supply. This power supply is Gold rated, and as I am in the UK on a 230-240 V supply, leads to ~75% efficiency > 50W, and 90%+ efficiency at 250W, suitable for both idle and multi-GPU loading. This method of power reading allows us to compare the power management of the UEFI and the board to supply components with power under load, and includes typical PSU losses due to efficiency.

We take the power delta difference between idle and load as our tested value, giving an indication of the power increase from the CPU when placed under stress.

Power Consumption Delta: Idle to AVX

86W undercuts the 95W TDP by a good margin, however one might suggest that the power efficiency difference of the power supply would take that into account. The stock load voltage was 1.168 volts in our motherboard, which does not suggest anything untoward regarding the VID.

AMD FX-8320E Review CPU and Web Performance
Comments Locked


View All Comments

  • cobrax5 - Wednesday, January 14, 2015 - link

    I don't think they were saying Intel chipsets work with AMD, they are saying Intel has a greater variety of options from value to performance.

    I'm actually a fan of AMD keeping their chipset as long as possible as it allows people to update just their old CPU. However, 6 years is a bit long. They really do need to completely revamp it. I guess they are just buying time until skybridge or whatever the ARM/x86 is called...
  • eanazag - Tuesday, January 13, 2015 - link

    Budget chipset is the 970. Real budget is a different AMD CPU like the AM1 socket or APU FM2 sockets.

    That is just how AMD does it, which is different than Intel. Intel offers 2 sockets. AMD has 3.
  • hojnikb - Tuesday, January 13, 2015 - link

    Not really. 970 is more like a midrange chipset like h97 with intel. You can't find cheap board with 970 like you can with intel.

    And having a different socket for low/midrange also kills it. Basicly you cant combine cheap board with a fast cpu like you can with intel.

    Amd should just stick to one socket. AM4 for apus and normal cpus like fx. That way you have a much bette selection for a given platform and better upgrade path (unlike fm2+).
    And ditch am1, nobody really needs socketed option on the lowest end. Just save a bit of money and solder that puppy in there.
  • abhaxus - Tuesday, January 13, 2015 - link

    I picked up an asrock 970 extreme4 on newegg for $ much cheaper do you need?
  • hojnikb - Wednesday, January 14, 2015 - link

    You can grab H81 mobo for as little as 44.99$. Thats a ~25$ difference, which could be spent elsewere.
  • jabber - Wednesday, January 14, 2015 - link

    Does it have serial and parallel ports on the back? ;-)
  • hojnikb - Wednesday, January 14, 2015 - link

    It has actually (looking at h81m-d plus).
    I dont see an issue here.
  • Cryio - Wednesday, January 14, 2015 - link

    Their newest chipset, the FM2+, is for home office, HTPC and low-end gaming. So if you want the latest in MOBO tech from AMD, you need to get either an APU or an Athlon.
  • LarsBars - Tuesday, January 13, 2015 - link

    I snagged two FX-8320Es for $119 each to use in two Hyper-V lab machines to leave powered on around the clock. I wanted the extra threads, high memory capacity, and low cost (and, as much as possible for an AMD machine, low power consumption.)

    They seem to be working out great. I am really glad to see AT still reviewing AMD even though it seems people have given up on them. Thanks, Ian.
  • Samus - Tuesday, January 13, 2015 - link

    Wow, AMD hasn't had a chipset update in 4 years? I wish Intel would take a note from them.

Log in

Don't have an account? Sign up now