Introduction and Testbed Setup

The traditional market for hard drives (PCs and notebooks) is facing a decline due to the host of advantages provided by SSDs. However, the explosion in the amount of digital content generated by the households and businesses has resulted in the rapid growth of the SMB / SOHO / consumer NAS market. Hard drive vendors have jumped on to this opportunity by tweaking the firmware and manufacturing process of their drives to create lineups specifically suited for the NAS market.

We have already had comprehensive coverage of a number of 4 TB NAS drives and a few 6 TB ones. Earlier this month, Seagate also introduced their WD Red Pro competitor, the Enterprise NAS HDD. We reviewed the 6 TB version and it turned out to be a great performer, albeit a bit costly for regular consumers. HGST aims to fill that space with the 6 TB Deskstar NAS. It falls in the same market category as the WD Red. However, the HGST Deskstar NAS drives have a 7200 RPM rating and the 5 / 6 TB variants come with 128 MB of DRAM cache. This is expected to make them perform closer to the Seagate Enterprise Capacity v4 and Enterprise NAS HDD drives. In the remainder of the review, we will try to determine whether that is the case.

The correct choice of hard drives for a NAS system is influenced by a number of factors. These include expected workloads, performance requirements and power consumption restrictions, amongst others. In this review, we will discuss some of these aspects while comparing the HGST Deskstar NAS against other drives targeting the NAS market. The list of drives that we will be looking at today is listed below.

  1. HGST Deskstar NAS (HDN726060ALE610)
  2. Seagate Enterprise NAS HDD 6 TB [ ST6000VN0001-1SF17Z ]
  3. Western Digital Red 6 TB [ WDC WD60EFRX-68MYMN0 ]
  4. Seagate Enterprise Capacity 3.5 HDD v4 6 TB [ ST6000NM0024-1HT17Z ]
  5. HGST Ultrastar He6 6 TB [ HUS726060ALA640 ]

Prior to proceeding with the actual review, it must be made clear that the above drives do not target the same specific market. For example, the WD Red and the HGST Deskstar NAS units are for 1- 8 bay NAS systems in the tower form factor. The Seagate Enterprise NAS HDD is meant for rackmount units up to 16 bays, but is not intended to be a replacement for drives such as the Enterprise Capacity v4. The Ultrastar He6 is targeted towards datacenters where its storage density and power efficiency lead to a lower overall TCO.

Testbed Setup and Testing Methodology

Our NAS drive evaluation methodology consists of putting the units to test under both DAS and NAS environments. We first start off with a feature set comparison of the various drives, followed by a look at the raw performance when connected directly to a SATA 6 Gbps port. In the same PC, we also evaluate the performance of the drive using some aspects of our direct attached storage (DAS) testing methodology. For evaluation in a NAS environment, we configure three drives of each model in a RAID-5 volume and process selected benchmarks from our standard NAS review methodology. Since our NAS drive testbed supports both SATA and SAS drives, but our DAS testbed doesn't, only SATA drives are subject to the DAS benchmarks.

We used two testbeds in our evaluation, one for benchmarking the raw drive and DAS performance and the other for evaluating performance when placed in a NAS unit.

AnandTech DAS Testbed Configuration
Motherboard Asus Z97-PRO Wi-Fi ac ATX
CPU Intel Core i7-4790
Memory Corsair Vengeance Pro CMY32GX3M4A2133C11
32 GB (4x 8GB)
DDR3-2133 @ 11-11-11-27
OS Drive Seagate 600 Pro 400 GB
Optical Drive Asus BW-16D1HT 16x Blu-ray Write (w/ M-Disc Support)
Add-on Card Asus Thunderbolt EX II
Chassis Corsair Air 540
PSU Corsair AX760i 760 W
OS Windows 8.1 Pro
Thanks to Asus and Corsair for the build components

In the above testbed, the hot swap bays of the Corsair Air 540 have to be singled out for special mention.
They were quite helpful in getting the drives processed in a fast and efficient manner for benchmarking. For NAS evaluation, we used the QNAP TS-EC1279U-SAS-RP. This is very similar to the unit we reviewed last year, except that we have a slightly faster CPU, more RAM and support for both SATA and SAS drives.

The NAS setup itself was subjected to benchmarking using our standard NAS testbed.

AnandTech NAS Testbed Configuration
Motherboard Asus Z9PE-D8 WS Dual LGA2011 SSI-EEB
CPU 2 x Intel Xeon E5-2630L
Coolers 2 x Dynatron R17
Memory G.Skill RipjawsZ F3-12800CL10Q2-64GBZL (8x8GB) CAS 10-10-10-30
OS Drive OCZ Technology Vertex 4 128GB
Secondary Drive OCZ Technology Vertex 4 128GB
Tertiary Drive OCZ Z-Drive R4 CM88 (1.6TB PCIe SSD)
Other Drives 12 x OCZ Technology Vertex 4 64GB (Offline in the Host OS)
Network Cards 6 x Intel ESA I-340 Quad-GbE Port Network Adapter
Chassis SilverStoneTek Raven RV03
PSU SilverStoneTek Strider Plus Gold Evolution 850W
OS Windows Server 2008 R2
Network Switch Netgear ProSafe GSM7352S-200

Thank You!

We thank the following companies for helping us out with our NAS testbed:

Specifications and Feature Set Comparison
Comments Locked

36 Comments

View All Comments

  • Laststop311 - Thursday, December 25, 2014 - link

    Price/reliability/performance I think this is the best series of drives to purchase.
  • akula2 - Saturday, January 3, 2015 - link

    You're absolutely correct. I own many Hitachi drives compared to WD and Seagate models.
  • realwarder - Friday, December 26, 2014 - link

    I purchased two of these and put them in a Dell server as RAID drives. It was curious to read about the Qnap IO error as the drives failed to operate correctly in the server to start with - when on SATA channel 2/3 they always got an IO error during the boot which caused Windows Storage Spaces to reject the drives. On moving to channel 0/1 they show no I/O error at boot and work fine.

    Once working, they appear ok if not a little noisy. Run 4 degrees warmer than the boot drive too.

    Only time will tell how they work out, but it's a lot of fast space which is what I was after - just look a lot of pain to get working due to the IO error causing the drive rejection.
  • StevieBee - Friday, December 26, 2014 - link

    Some advice please folks.. I have 2x8 bay synology drives ( 1815+) which i use for SOHO file backup and some media on a very small network of 3 users. At the moment i have 5 3TB WD reds in each and i want to add another 3 drives to each.

    My question is what are the best drives to add to the array? Reliability is more an issue than cost.

    I was at first thinking about WD red Pro, but i am worried that the higher speed than my existing reds would cause a problem...Will it?

    The other alternative would be to make one unit all the new deckstars with the higher speed, and then use the old WD reds to increase the other unit.

    Any advice would be greatly appreciated.

    Merry Christmas

    Steve
  • intiims - Friday, December 26, 2014 - link

    Great review from a great site. Nice Products Spec tables, very usefull and easy to understand.
    Guspaz: I think little and fast SDD drives are much better than big and slow, by the way, who can fill up 8TB ? I have never ever got more than 1TB. Even with a lot of movies and photos..
    I found i nice site witth great reviews:
    http://hddex.blogspot.com/
  • akula2 - Saturday, January 3, 2015 - link

    @However, the HGST Deskstar NAS drives have a 7200 RPM rating and the 5 / 6 TB variants come with 128 MB of DRAM cache. This is expected to make them perform closer to the Seagate Enterprise Capacity v4 and Enterprise NAS HDD drives.

    Ganesh, that's a wrong comparison. Deskstar HDDs are targeted at Consumer or SOHO or even SMB segment. Why? Because it gets quite easy to go for RAID by adding a few HDDs in the Cases. Rest is all known.

    If folks (like me) looking for Enterprise-grade drives, go for Hitachi's SAS 12 GB/s HDDs to get very high performance and ultra reliability. One can even choose SATA III HDD drives too. Most important is to know when to use those models. E.g.,

    a) Hitachi Ultrastar 7K6000 SAS 12Gb/s - 6 TB, 7200, 128 MB HDD
    b) Hitachi Ultrastar 7K6000 SATA 6Gb/s - 6 TB, 7200, 128 MB HDD
    c) Hitachi Deskstar NAS SATA 6Gb/s - 6 TB, 7200, 128 MB HDD

    Those three drives may look more or less same, but they aren't!

Log in

Don't have an account? Sign up now