The Current Intel offerings

Before we can discuss the ARM server SoCs, we want to look at what they are up against: the current low end Xeons. We have described the midrange Xeon E5s in great detail in earlier articles.

The Xeon E3-12xx v3 is nothing more than a Core i5/i7 "Haswell" dressed up as a server CPU: a quad-core die, 8MB L3 cache, and two DDR3 memory channels. You pay a small premium – a few tens of dollars – for enabling ECC and VT-d support. Motherboards for the Xeon E3 are also only a few tens of dollar more expensive than a typical desktop board, and prices are between the LGA-1150 and LGA-2011 enthusiast boards. The advantages are remote management courtesy of a BMC, mostly an Aspeed AST chip.

For the enthusiasts that are considering a Xeon E3, the server chip has also disadvantages over it's desktop siblings. First of all, the boards consume quite a bit more power while in sleep state: 4-6W instead of the typical <1W of the desktop boards. The reason is that server boards come with a BMC and that these boards are supposed to be running 24/7 and not sleeping. So less time is invested in reducing the power usage in sleep mode: for example the voltage regulators are chosen to live long. Also, these boards are much more picky when it comes to DIMMs and expansions cards meaning that users have to check the hardware compatibility lists for the motherboard itself.

Back to the server world, the main advantage of the Xeon E3 is the single-threaded performance. The Xeon E3-1280 v3 runs the Haswell cores at 3.6GHz base clock and can boost to 4GHz. There are also affordable LP (Low Power) 25W TDP versions available, e.g. the Xeon E3-1230L v3 (1.8GHz up to 2.8GHz ) and E3-1240L v3 (2GHz up to 3GHz). These chips seemed to be in very limited supply when they were announced and were very hard to find last year. Luckily, they have been available in greater quantities since Q2 2014. It also worth noting that the Xeon E3 needs a C220 chipset (C222/224/226) for SATA, USB, and Ethernet, which adds 0.7W (idle) to 4.1W (TDP).

The weak points are the limited memory channels (bandwidth), the fact that Xeon E3 server is limited to eight threads, and the very limited (for a server) 32GB RAM capacity (4 Slots x 8 DIMMs). Intelligent Memory or I'M is one of the vendors that is trying to change this. Unfortunately their 16GB DIMMs will only work with the Atom C2000, leading to the weird situation that the Atom C2000 supports more memory than the more powerful Xeon E3. We'll show you our test results of what this means soon.

The Atom C2000 is Intel's server SoC with a power envelope ranging from 6W (dual-core at 1.7GHz) to 20W (octal-core at 2.4GHz). USB 2.0, Ethernet, SATA3, SATA2 and the rest (IO APIC, UART, LPC) are all integrated on the die, together with four pairs of Silvermont Cores sharing 1MB L2 cache. The Silvermont architecture should process about 50% more instructions per clock cycle than previous Atoms due an improved branch prediction, the loop stream detector (like the LSD in Sandy Bridge) and out-of-order execution. However the Atom micro architecture is still a lot simpler than Haswell.

Silvermont has much smaller buffers (for example, the load buffer only has 10 entries, where Haswell has 72!), no memory disambiguation, it executes x86 instructions (and not RISC-like micro-ops), and it can process at the most two integer and two floating point instructions, with a maximum of two instructions per cycle sustained. The Haswell architecture can process and sustain up to five instructions with "ideal" software. AES-NI and SSE 4.2 instructions are available with the C2000, but AVX instructions are not.

The advantages of the Atom C2000 are the low power and high integration -- no additional chip is required. The disadvantages are the relatively low single-threaded performance and the fact that the power management is not as advanced as the Haswell architecture. Intel also wants a lot of money for this SoC: up to $171 for the Atom C2750. The combination of an Atom C2000 and the FCBGA11 motherboard can quickly surpass $300 which is pretty high compared to the Xeon E3.

ARM, Micro and Scale-out Servers The ARM Based Challengers: AppliedMicro
POST A COMMENT

78 Comments

View All Comments

  • patrickjchase - Thursday, December 18, 2014 - link

    It's been a while since I worked on this stuff, but I don't think that the statement that "CCN is very comparable to the ring bus found inside all Xeon processors beginning with Sandy Bridge" is quite right.

    CCN
    Reply
  • patrickjchase - Thursday, December 18, 2014 - link

    Finishing my comment:

    CCN
    Reply
  • stefstef - Wednesday, December 17, 2014 - link

    the idea of having an energy efficient design certainly will pay off. nvidia and samsung showed that having i.e. 4 cores and a fifth core dedicated to the energy management can be a good low cost solution. i dont often read the articles at anandtech because they are usually boring. although i am happy to place a coment here. arm rules in certain fields but in a couple of years only because intel will allow them to do so. every company needs a room to live in. another american breakfast for the chinese who will get their share in the processor market as well. Reply
  • milli - Thursday, December 18, 2014 - link

    I don't understand how ARM is suddenly going to succeed while MIPS and PowerPC have already tried and failed. I feel that ARM is more of a market trend than anything else (in the server market).
    Even the current ARM server SOC manufacturers have already tried to penetrate the server market. Cavium and Broadcom already had custom designed low-power MIPS SOCs. IBM, Applied Micro and Freescale have had a bunch of low-power PowerPC options.
    By the time any of these products is released, Intel is going to have a better alternative thanks to their process advantage. No IT manager is going to manage to convince any of the corporate fat-cats that a huge overhaul is needed. Same story over again.
    Reply
  • yuhong - Friday, December 19, 2014 - link

    "Unfortunately their 16GB DIMMs will only work with the Atom C2000, leading to the weird situation that the Atom C2000 supports more memory than the more powerful Xeon E3."
    I think the reason is software related. More precisely, the Memory Reference Code (MRC).
    Reply
  • intiims - Tuesday, December 30, 2014 - link

    If You want to know something about External Hard Drives visit http://www.hddmag.com/ Reply
  • adrian1987 - Monday, January 5, 2015 - link

    Hi. The Haswell core can actually have a max IPC of 6 instructions per cycle using macro-fusion not 5 as listed here (assuming the code is ideal). It has 2 execution units that can handle fused ALU and branch instructions. Source: http://www.anandtech.com/show/6355/intels-haswell-... Reply
  • aaronjoue - Tuesday, April 7, 2015 - link

    Here is the real micro server. http://www.ambedded.com.tw/pt_list.php?CM_ID=20140...
    http://wiki.ambedded.com.tw/index.php?title=MicroS...
    7 & 21 nodes in a chassis
    It support Ubuntu and open source Ceph.
    Reply

Log in

Don't have an account? Sign up now