In-Win GRone Case Review: Do Features Make the Case
by Dustin Sklavos on September 18, 2012 12:01 AM EST- Posted in
- Cases/Cooling/PSUs
- In-Win
- ATX
- E-ATX
In and Around the In-Win GRone
While I'm for the most part inclined to take the In-Win GRone's aesthetic out of the equation, I do want to make a few generalized notes about the build. I personally like the gunmetal gray color In-Win uses for the case, and the steel side panels and chassis match the plastic fascia and shell very well. There's a two-toned black and gray motif that I think serves the GRone well; if nothing else, it's fairly consistent.
The front of the enclosure is marked by what appear to be a series of ventilated bay covers similar to the old Cooler Master Centurion, but in actuality only the top three of these covers actually hide 5.25" drive bays; the rest are for consistency's sake while also allowing fresh air to reach the front intake fans hidden behind them. Above the drive bays are a healthy amount of connectivity: two USB 2.0 ports and two USB 3.0 ports along with the usual audio jacks. Also included is a sliding fan speed switch that allows the case fans to operate in "silence" and "turbo" modes. The reset button is actually shared with the IDE access LED, which is the long sliver to the left of the power button. It's not labelled at all, but that's what it is.
When you move to the top of the GRone, there's an angled accent that's ventilated and hides the trio of 120mm/140mm fan mounts, and in front of it is the recessed SATA hotswap connector. It's not quite as elegant as NZXT's solution in the H2 but it gets the job done.
Interestingly, the left side panel has a large window that's extruded and tinted aquamarine; if you look closely you can see the In-Win logo on it. There aren't any fan mounts, though. The only fan mount on a side panel is actually behind the motherboard tray, though an enterprising user could probably swap the two side panels if they felt like the existing allowances made for cooling were inadequate.
Removing the thumbscrews and popping open the GRone reveals business as usual with a few kinks thrown into the mix. In-Win positions the GRone as an E-ATX case primarily, and given the placement of the routing holes in the motherboard tray they're pushing that scenario pretty hard. There's a substantial opening next to the power supply bay, though, and both drive cages are actually removable. In-Win uses a drive sled design similar to what SilverStone employed with the FT02, where the door allows the drives to lock into place. Worth noting is the way removing the center drive cage doesn't result in losing the 140mm interior fan.
In-Win's design is for the most part clean, though they use red LED fans on the front intakes. Those fans are fairly dim and inobtrusive, presenting more of an accent, but then why tint the side window blue instead of red? We're already at three tones before we get to that blue window. Aesthetics notwithstanding, though, the GRone promises to be at least reasonably easy to assemble and I'm fairly optimistic about its cooling potential.
31 Comments
View All Comments
colinstu - Tuesday, September 18, 2012 - link
Happy with my Antec P280.Good cases do exist out there, just gotta look at the right companies (cheapies like In-Win isn't one of them).
Corsair 650D was looking like a nice option too, but the side window was a turnoff (I'm not into them these days) and it cost more money so I ultimately went with the Antec.
The Fractal Design Core 3000 I'd go with if I wanted to cheapen it up some more, and the NZXT Source 210 if I wanted to really cheapen it up. I used this NZXT in a friend's build recently too and I was quite happy with it (and so is he).
There's dozens more nice cases out there... but these 4 are my top easy picks (4 different price points) with getting a well featured case that doesn't look fugly.
peterfares - Tuesday, September 18, 2012 - link
I too have an Antec P280 which I bought for the same reasons. When I was 14 I loved cases like this one with windows and lights. My next build really toned it down and my latest case finally did away with all the useless and annoying lights and windows. I can't stand any lights or noise now, I even put electrical tape over the bright blue power and HDD LEDs on the case. I may just unplug them next time I open it up.Belard - Tuesday, September 18, 2012 - link
I've built a system with a P280... great case.I would LOVE to see a mini-version... designed to hold a single 5.25 drive, 4x 3.5/2.5 drives...
I'm still on my Antec P120, which is a smaller and doorless version of the P180. The P280 blows away the P180. Its not as ENGINEERED as the P180 with its air-chambers, drive cages, etc.
But its (A) Lighter (B) Cheaper (C) Easier to work on (D) USB 3.0.
My son has lights in his case (blue and red), also lets me know easily that his PC is on. I do like a little blue to glow from real air-vents, but nothing that lights up the room.
colinstu - Wednesday, September 19, 2012 - link
Hey, on the topic of "mini" P280s... would a "Fractal Design Define Mini" be up your alley?http://www.newegg.com/Product/Product.aspx?Item=N8...
Looks like an awesome option.
ssj4Gogeta - Wednesday, September 19, 2012 - link
"I can't stand any lights or noise now, I even put electrical tape over the bright blue power and HDD LEDs on the case. I may just unplug them next time I open it up."Haha, for some reason I pictured you as a robot running around saying "Kill all lights... kill all lights".
ypsylon - Tuesday, September 18, 2012 - link
That people still are interested in cases like this one. Steel and plastic. Brrrr... I know that aluminum is usually more expensive, but easily you can find good alu case around same kind of money. Try alu once and you will never go back. Simple as that.Dustin Sklavos - Tuesday, September 18, 2012 - link
What, like Lian Li or Cubitek?Aluminum is HIGHLY overrated.
Flying Goat - Tuesday, September 18, 2012 - link
Who in their right mind calls a case "GRone"? Did anyone even try to read that phonetically?randinspace - Tuesday, September 18, 2012 - link
Larry the cable guy came to mind.sesante2000 - Tuesday, September 18, 2012 - link
I could understand if this case had something unique or special to offer, But no, It's just ugly.Finding a good case that suites ones style and function is just as hard as finding the right motherboard to match.
Cases like these perpetuate the nonsense that "gamer" cases have become.
If I walked into someones house and saw this I would think they just didn't know any better.
But they should, as they are building their own PC.
But who am I to judge?
I mean, This is the lowest common denominator in custom PC cases.