The Intel Core i3-12300 Review: Quad-Core Alder Lake Shinesby Gavin Bonshor on March 3, 2022 8:30 AM EST
LGA1700: Reports of Bending Sockets
Since the launch of Intel's Alder Lake-based 12th generation Core processors, there have been several reports of high and abnormal temperatures, even at stock frequencies. The art in balancing out the integrated heat spreader (IHS) of a processor is one thing extreme overclockers have been working on for many years now. Typically called lapping, extreme overclockers finely sand down the IHS to make it a more flat and even surface. The aim is to reduce gaps by sanding out imperfections or curvatures. This is so that the cooling plate of the CPU cooler makes better contact with the IHS, and it has been known to reduce CPU thermals by a decent amount.
Our Core i9-12900K IHS is 'relatively' flat and even.
Fellow enthusiast Igor Wallossek published an article on his website, Igorlabs.de, which investigates potential issues with the ILM (independent loading mechanism), which keeps the processor firmly in place within the socket. Doing some investigations myself, our testbed Core i9-12900K which we've used the most doesn't seem to show any noticeable gaps or abnormal curvatures when used with a metal ruler. This, however, changes when we install the CPU into an LGA1700 socket or into one of the readily available Z690 motherboards.
The rear of the Intel LGA1700 socket with Core i9-12900K installed
There have been many reports that installing an Alder Lake processor into one of the cheaper Z690 or B660 models causes the CPU socket to bend and the IHS itself. We saw no bending before installing our Alder Lake processor into the socket of the GIGABYTE Z690 Aorus Master, which is a premium board priced around $470. Installing the Core i9-12900K into the socket and locking the ILM into place, we saw noticeable bending on the rear of the board, as our picture above illustrates.
The implications of this are two-fold. Firstly, from a cooling standpoint, it will and can lead to increased thermals due to the gaps this creates between the cold plate of the cooler and the IHS on the CPU. While thermal paste will generally fill some of the gaps, the problem is the nature of the gap and its size that the increased pressure the ILM creates. The second and perhaps the most fundamental part of this, it should NOT be happening.
Buildzoid 'rambles' about the LGA1700 washer mod, a potential fix?
While PCBs can be flexible, the nature of heat creating further expansion could lead to damaged sockets damaged processors and ultimately leave users with an expensive headache. There's also the potential to create permanent bends in the PCB area around the socket. This is not a good thing. It should be noted that LGA1700 motherboards either use ILM's manufacturers by Lotes or Foxconn, but it's reported that both ILMs are affected by this issue.
Fundamentally, there are a couple of potential workarounds to the issue, including a large, robust backplate. Still, on some of the AIO coolers, we have seen recently, these usually come with flimsy plastic backplates. Another potential fix is installing four washers to alleviate the issue. Both Igorlabs.de and Buildzoid have posted content detailing this, with Igor Wallossek doing some testing using washers of a different thickness to show variation.
Post Your CommentPlease log in or sign up to comment.
View All Comments
nandnandnand - Monday, March 7, 2022 - linkThe 8-core chiplet with high yields makes 4-cores pointless for AMD to produce, and that won't change anytime soon since Zen 4 and probably Zen 5 will use 8-core chiplets.
The real "problem" is that AMD hiked prices during Intel's stumbles. A good strategy that made them lots of cash during a chip shortage/supply crisis. But if that leak is correct, they will launch a 6-core near $100-120 to counter budget Alder Lake chips like the i3-12100F.
AMD could put Van Gogh on AM5 for the DIY market. That would use 7nm while other products move down to 5nm. They will also have basic graphics on Zen 4 Raphael which would allow for office-type builds without discrete GPUs. Finally, there is the Monet on GloFo 12LP+ rumor. Even if that was laptop only, it could be an impulse buy (use display output).
AM5 will only be a good budget option when the DDR5 prices come down, but the Zen 3 price cuts and new rumored CPUs keep AM4 in the running.
Qasar - Tuesday, March 8, 2022 - link" The real "problem" is that AMD hiked prices during Intel's stumbles " and its the same " problem " intel did pre zen, yet very few seem to complain about it then. whats your point ?
some really need to let this go, its like some think amd should of kept their prices low, as thats what they did before, before they had the performance to go with those prices, like you know, intel did all those years ?
mode_13h - Tuesday, March 8, 2022 - link> office-type builds without discrete GPUs.
Office-type PCs haven't had dGPUs for more than a decade!
Heck, I used a Sandbridge i7-2600K without a dGPU, and it was entirely fine at 1440p.
eloyard - Sunday, March 6, 2022 - linkIn Poland there are pretty much no compatible Intel boards under 100$, meanwhile there are plenty of B450 and few B550 available. Cheapest of them at 50$.
Intel's up to their usual stuff misleading market? Why am i not surprised.
529th - Sunday, March 6, 2022 - linkWhy has Anandtech benches excluded CS:GO?
MDD1963 - Monday, March 7, 2022 - linkWonder just how many purchasing the 12300 are also getting Z690,...and DDR5? :)
mode_13h - Tuesday, March 8, 2022 - linkExactly.
dicobalt - Friday, March 11, 2022 - linkDDR5 4800 costs 250% of DDR4 3200 but only gives 10% performance improvement. I keep telling people the DDR5 launch is premature until Q4-2024 to Q1-2025 when all the major memory manufacturers finally have new fabs online.
kath1mack - Thursday, April 14, 2022 - linkLooks great