Iometer sequential write performance benchmarks

The Super Talent Express RC8 flash drive dominates the field in sequential diminutive file writes. Notice, however, the rest of the USB 3.0 drives already pulling relatively far ahead of the USB 2.0 drives.

The RC8 continues its domination, though the ADATA S102 starts to pull away from the pack as well.

Once we hit file sizes of 512KB and higher, the field changes dramatically. The Patriot Supersonic Magnum now leads by a nearly 100% margin. Note USB 2.0 Kingston R500 edges the USB 3.0 Super Talent Express DUO in this benchmark.

We see a very similar pattern with 1MB file sizes compared to 512KB file sizes, though the USB 3.0 Super Talent Express DUO now leads the USB 2.0 Kingston R500.

The performance hierarchy, at least in terms of sequential file writes as measured by Iometer, appears to have coalesced.

This pattern remains consistent as file sizes approach 1GB, the upper limit of Iometer's file size testing range.

You can see from these write benchmarks that USB 3.0 mitigates the storage flash drive's main weakness: slow file writes. Reading from a flash drive is almost always substantially faster than writing to it. Hopefully these dramatically faster write benchmarks translate to dramatically faster writes in real-world usage. But first, the read benchmarks, on the next page.

Testing Methods and Sample Flash Drives USB 3.0 and 2.0 Flash Drive Native Interface Read Performance
Comments Locked

42 Comments

View All Comments

  • webmastir - Friday, July 29, 2011 - link

    great write up, thanks!
  • Kelemvor - Friday, July 29, 2011 - link

    Absolutely. Hit on all the topics. Thanks. And they really aren't all that much more expensive.
  • sbrown23 - Friday, July 29, 2011 - link

    It was good, but I would like to have seen a testing of Linux distro running from the flash drive to get an idea of performance in that type of scenario. Load each up with a Linux distribution, boot each one and run a couple of benchmarks (heck even include boottime, etc.)
  • pvdw - Thursday, December 1, 2011 - link

    Definitely. The biggest use I get out of flash drives is for tech support, so I find random reads and writes sorely lacking. :(
  • xygot - Friday, July 29, 2011 - link

    This is a nice article for USB 3.0 using flash drive. However, I'm more interested in benchmark between USB 3.0 and eSata using external hard drive. Is there a benchmark on the way?

    This is what holding me for now if I need to upgrade to USB 3.0 or stay on eSata.
  • Zenthar - Friday, July 29, 2011 - link

    I would like to see that as well. Given the $/GB of those thumbdrives, I would also be curious to see external USB 3.0 SSDs. Different needs will warrant different solutions.

    For backups for example (mostly sequential read/write), it would probably be more cost/efficient to get an external 2.5 HDD. If you want something to install and run applications from, then perhaps you will get better performance out of an external SSD.

    The extra size of external HDD/SSD could be a bit annoying, but this usually translates to lower possibility of losing or washing the drive.
  • Gigantopithecus - Friday, July 29, 2011 - link

    Hi xygot - I don't plan on adding a USB 3.0 vs eSATA performance comparison to the article. However, I can report that using a USB 3.0 HDD dock with a Western Digital WD20EARS on both ends of the transfer, for MP3 files, I get sustained writes of ~30MB/s and sustained reads of 50MB/s. Hope that helps!
  • ckryan - Friday, July 29, 2011 - link

    If you want to use a mechanical HDD, just stick with eSata. You won't be limited in any aspect of the HDD's performance. But I think there are some newer eSata and USB3 docks on the way, or possibly already on the market. Why not both?

    In my eSata II testing, I've found that a 7200rpm desktop drive has almost identical performance in an enclosure as it does with the Sata ports on the MB. As for USB3.0, I have two motherboards that support it, but no usb 3.0 devices. So I can't really speak to 3.0's performance except to say it's not like your HDD will run faster in a USB3 enclosure than it does in your computer.

    As for the few USB3 external HDD, it's always been my preference to roll my own with an enclosure and my own HDD.
  • Sweeo - Saturday, July 30, 2011 - link

    Well for me I would go for USB 3,how many comps/other divices got eSata ?
    USB 3 backword compatable
    The thing is "other devises"
  • doylecc - Monday, August 1, 2011 - link

    Adding eSATA is easy if you have a desktop. The adapter is inexpensive; this one costs less than $5 and provides two eSATA ports:

    http://www.newegg.com/Product/Product.aspx?Item=N8...

    The eSata adapter socket mounts on an expansion card bracket that installs in any unused expansion card opening in the back of your computer.

    Performance-wise, eSATA will allow you to extract the full performance from any mechanical hard drive. The faster SSDs need SATA III (6GB/sec) or USB 3 bandwidth for full performance.

    Of course, if you have a laptop, you're limited to the built-in ports.

Log in

Don't have an account? Sign up now