Value RAM Roundup: Computing On a Budget
by Wesley Fink on April 11, 2005 4:26 PM EST- Posted in
- Memory
Mushkin EM Series PC3200
Mushkin is admired by many computer enthusiasts for the quality of their products and the customer service that they provide. In the past, the only way to buy Mushkin memory was direct at www.mushkin.com. Recently, however, Mushkin has also been available through web retailers like Monarch, NewEgg, TigerDirect, and AxionTech. In Canada, Mushkin is available through NCIX.If you do order direct from Mushkin, you will get their famous "pillow pack" that cradles their memory in an air bubble. The point is that Mushkin makes solid products, stands behind their products, and treats customers well.
Mushkin EM is their Value line product, and like other Mushkin memory, it comes in a sealed anti-static bag instead of the fancier packaging that many others use. All Mushkin memory, even this Value product, comes with heatspreaders.
Specifications
The Mushkin EM is specified at the unimpressive specs of 3-3-3-8, but keep in mind that Value RAM is normally about price and not performance.| Mushkin EM Series PC3200 (DDR400) Memory Specifications | |
| Number of DIMMs & Banks | 2 DS |
| DIMM Size Total Memory |
512 MB 1GB |
| Rated Timings | 3-3-3-8 at DDR400 |
| SPD (Auto) Timings | 3-3-3-8 |
| Rated Voltage | 2.6V |
The EM memory performed fine at stock DDR400, but it is another Value RAM with no overhead.
Test Results
| Mushkin EM Series PC3200 (DDR400) - 2 x 512Mb Double-Bank | |||||||
| CPU Ratio at 2.4GHz | Memory Speed |
Memory Timings & Voltage |
Quake3 fps |
Sandra UNBuffered | Sandra Standard Buffered |
Super PI 2M places (time in sec) |
Wolfenstein - Radar - Enemy Territory fps |
| 12x200 | 400 DDR | 3-3-3-6 2.6V 1T |
524.0 | INT 2600 FLT 2752 |
INT 6049 FLT 6005 |
83 | 111.1 |
| 12x205 (2.46GHz) |
Highest CPU/Mem Performance | 3-3-3-6 2.9V 1T |
525.9 | INT 2616 FLT 2749 |
INT 6153 FLT 6130 |
81 | 112.4 |
All the memory manufacturers generally have access to the same memory chips, and we can only surmise that Mushkin chose the chips in our EM sample for price. The manufacturer chose which Value RAM to send us for testing, and we can only wonder why Mushkin chose to send us EM for this roundup. We have tested other Mushkin Value RAM over the years, and we have generally been pleased with the performance and head room of Mushkin value products. Our advice would be to choose this Mushkin EM if you will only run at stock speeds. It could be that the memory is just a bad match to the AMD memory controller or the DFI, but further testing would be required to see if the EM performs better on other platforms.
Aida 32 is now available as Everest Home Edition, a free download from www.lavalys.com. We have found this benchmark to be very useful in examining read/write performance and memory latency.
| Mushkin EM Series PC3200 (DDR400) 2x512Mb Double-Bank Everest 1.51 |
|||||
| CPU Ratio at 2.4GHz | Memory Speed | Memory Timings & Voltage |
Everest READ MB/s |
Everest WRITE MB/s |
Everest Latency ns |
| 12x200 | 400 DDR | 3-3-3-6 2.6V 1T |
5710 | 1873 | 52.8 |
| 12x205 (2.46GHz) |
Highest CPU/Mem Performance | 3-3-3-6 2.9V 1T |
5790 | 1940 | 51.0 |
There's little to analyze with such a small performance range. We would suggest that you choose another Mushkin value RAM if you want to shop for a Mushkin product at low cost. The Mushkin website shows a 1GB CL2 DDR400 kit at $155 compared to $147 for the EM.
Facebook
Twitter
RSS
102 Comments
View All Comments
2cpuminimum - Wednesday, June 1, 2005 - link
I have to agree that a value ram analysis would be more useful if it checked stability of less well known brands, such as memory pro. Also it would be useful to review sodimm ram 512MB modules, as many budget laptops come with scanty ram and it is usually cheaper to add it aftermarket than buy more from the manufacturer.Pjotr - Wednesday, May 4, 2005 - link
Oh, I forgot, the package does say it has EVP!Pjotr - Wednesday, May 4, 2005 - link
"If you are interested in the OCZ Value VX, note the differences in the two part numbers, one with a "W" and one without.Value VX = OCZ4001024WV3DC-K
2.5-3-3-7 (picture) Supports EVP (Extended Voltage Protection)
Value = OCZ4001024V3DC-K
3-4-4-8 Does not Support EVP"
I bought the OCZ Value 2x512 RAM with 3-4-4-8 timings for $115 at Fry's, so basically I got fooled at that price?
I have this setup: DFI nF4 SLI-D, X800XL, Winchester 3000+.
I've tried this RAM and it won't run at CAS2 at all, I think, I need to do some more work. I've tried 3.0 to 3.2 V in general. I do get it to run 2.5-3-3-8 up to about 240 MHz, from there I need to relax to 2.5-4-3-8 and I then hit 250 quite stable, 255 SuperPI stable but not 3DMark stable.
I'm a bit disappointed now... any hints? Shouldn't I be able to get better timings at 240-250 MHz too? The memory chips are marked OCZ, not blank. Don't know exact markings right now.
Baldeagle76 - Friday, April 29, 2005 - link
Edit I am an idiot and don't know how to read page 2. Thanks for a good article. Do compliments from idiots count ? As far as the voltages go I was happy to see what it "could" handle if this is not anything that I would ever do in my motherboard, the curiousity inside me found this interesting. I thank you for pushing the ram to the limit because in the long run I think the ram that tolerates that type of voltage would have an advantage in OC'ing. I was very curious about the posts earlier saying that you can keep your Ram at ddr400 (effective) and increase your FSB and have no asynchronous lag. This probably isn't the place for that discussion but I nonetheless was very interested in this information. Maybe a review of that is in order for the next Ram test if you have the time ?Baldeagle76 - Friday, April 29, 2005 - link
I have a question. After reading this article I went to NEW EGG to look up the current prices of RAM. Specifically I was looking for the prices on the Value VX ram. Sadly, I did not find anything that fit this description. I don't know if it because I don't know what I am looking for. In None of the titles of the RAM did they mention Value VX. Value was mentioned but how do I know if it is the VX or not? Also looked for the OCZ value BH5 and again I am not sure if I don't know what to look for or if they are out of stock because I didn't see any. It might be helpful for consumers making purchases based off of the articles on Anandtech to include the manufacturer part number so we know whether or not we are getting the same thing reviewed or not. Maybe you could help me out with this because I was looking at getting some of this 512x2 for a second machine i am building but would definetly want the stuff reviewed and not stuff I don't know how good it is. Just including the manufacturer part number would be very helpful in this regard, especially for ram.Baldeagle76 - Friday, April 29, 2005 - link
alexXx - Tuesday, April 19, 2005 - link
wow, honestly now. For a reputable website, why is it that the level of english used in this article could be bested by a 4th grader.YOU CANNOT pluralize 'memory' If you want to refer to more than one you use 'pieces of memory' or 'memory sticks'. Also when you say 'the memories' you can bloody just say 'the memory'. It is not a hard concept. Would you see this in a newspaper? NO. Same should go for online articles.
wakeboarder3 - Tuesday, April 19, 2005 - link
I just got some of this ram, 2 gigs after reading the review "0CZ4001024WV3DC-K" And all I can say is WOW!!!!! 2-2-2-11 @2.9 220 X 11 on my 2500m/ABITAnd for $115 a gig. Runs better then my old bh-5
CanadianDoc - Monday, April 18, 2005 - link
#93 As Wesley said in the opening paragraph, the PURPOSE of this RAM review is to help the reader find the combination of components yielding the best overall "system performance" for the money.That's the Big Picture that you need to keep in mind.
In that context, the combination of Crucial Ballistix RAM, a DFI nF4 mobo, and a Venice 3200+ CPU at 10 x 280 MHz is a very attractive one, in terms of system speed versus cost.
Of course, "system performance" can include other things than just speed, such as fault tolerance, noise, heat, portability, availability, etc.
I happen to value low noise as well as high speed, which is why I suggested the other components, too. I simply hope that my comments give other readers a few ideas of their own.
And that's the point of these forums, isn't it?
JoKeRr - Sunday, April 17, 2005 - link
#92 this is a ram review.wesley: it's interesting to see that the new BH-5, tccd, Micron rev.g, and UTT chip, at 2-2-2-5 timing ddr400, they never reached over 3k on sandra unbuffered test. However, going back to the old P4 2.4C test bed, Mushkin and OCZ 3500 BH-5 running at ddr400 2-2-2-5 had over 3.1k each.
Guess the old BH-5 is still faster than the new one.