Trials of an Intel Quad Processor System: 4x E5-4650L from SuperMicro

In recent months at AnandTech we have tackled a few issues of dual processor systems for regular use, and whether having a dual processor system as a theoretical scientist may help or hinder various benchmark scenarios.  For the problems that I encountered as a theoretical physical chemist, using a dual processor system without any form of formal training dealing with memory allocation (NUMA) resulted in a severe performance hit for anything that required a significant level of memory accesses, especially grid solvers that required pulling information from large arrays held in memory.  Part of the issue was latency access dealing with data that was in the memory of the other CPU, and thus a formal training in writing NUMA code would be applicable for multi-processor systems.  Nevertheless in my AnandTech testing we did see significant speedup when dealing with various ‘pre-built’ software scenarios such as video conversion using Xilisoft Video Converter, rendering using PovRay and our 3D Particle Movement Benchmark.

To take this testing one stage further, SuperMicro kindly agreed to loan me remote desktop access to one of their internal quad processor (4P) systems.  The movement from 2P to 4P is almost strictly in the realms of business investment, except for a few Folding@home enthusiasts that have seen large gains moving to a quad processor AMD system using obscure buyers for motherboards and eBay for processors.  But with 4P in the business realm, the software has to match that usage scenario and scale appropriately.

Our testing scenario will cover our server motherboard CPU tests only – as I only had remote desktop access I was not fortunate enough to do any ‘gaming’ tests, although our gaming CPU article may have shown that unless you are doing a massive multi-screen multi-GPU setup then anything more than a single Sandy Bridge-E system may be overkill.

Test Setup:

Supermicro X9QR7-TF+
4x Intel Xeon E5-4650L @ 2.6 GHz (3.1 GHz Turbo), 8 cores (16 threads) each
Kingston 128GB ECC DDR3-1600 C11
Windows Server Edition 2012 Standard

Issues Encountered

As you might imagine, moving from 1P to 2P and then to 4P without much experience in the field of multi-processor calculations was initially very daunting.  The main issue moving to 4P was having an operating system that actually detected all the threads possible and then communicated that to software using the Windows APIs.  In both Windows Server 2008 R2 Standard and 2012 Standard, the system would detect all 64 threads in task manager, but only report 32 threads to software.  This raises a number of issues when dealing with software that automatically detects the number of threads on a system and only issues that number.  In this scenario the user would need to manually set the number of threads, but it all depends on the way the program was written.  For example, our Xilisoft and 3DPM tests do an automatic thread detection but set the threads to what is detected, whereas PovRay spawns a large number of threads despite automatic detection.  Cinebench as well detected half the threads automatically, but at least has an option to spawn a custom number of threads.

Point Calculations - 3D Movement Algorithm Test

The algorithms in 3DPM employ both uniform random number generation or normal distribution random number generation, and vary in various amounts of trigonometric operations, conditional statements, generation and rejection, fused operations, etc.  The benchmark runs through six algorithms for a specified number of particles and steps, and calculates the speed of each algorithm, then sums them all for a final score.  This is an example of a real world situation that a computational scientist may find themselves in, rather than a pure synthetic benchmark.  The benchmark is also parallel between particles simulated, and we test the single thread performance as well as the multi-threaded performance.

3D Particle Movement Single Threaded3D Particle Movement MultiThreaded

The 3DPM test falls under the half-thread detection issue, and as a result of the high threads but lower single core speed we only just get an improvement over a 2P Westmere-EP system.  For single thread performance the single thread speed of the E5-4650L (3.1 GHz) is too low to compete with other Sandy Bridge and above processors.

Compression - WinRAR 4.2

With 64-bit WinRAR, we compress the set of files used in the USB speed tests. WinRAR x64 3.93 attempts to use multithreading when possible, and provides as a good test for when a system has variable threaded load.  WinRAR 4.2 does this a lot better! If a system has multiple speeds to invoke at different loading, the switching between those speeds will determine how well the system will do.

WinRAR 3.93WinRAR 4.2

As WinRAR is ultimately dependent on memory speed, the 1600 C11 runs into the issues that the lower memory speed situations face.  Despite this, the 2P Westmere-EP system still beats the 4P but you really need a good single core system with high bandwidth memory to take advantage.

Image Manipulation - FastStone Image Viewer 4.2

FastStone Image Viewer is a free piece of software I have been using for quite a few years now.  It allows quick viewing of flat images, as well as resizing, changing color depth, adding simple text or simple filters.  It also has a bulk image conversion tool, which we use here.  The software currently operates only in single-thread mode, which should change in later versions of the software.  For this test, we convert a series of 170 files, of various resolutions, dimensions and types (of a total size of 163MB), all to the .gif format of 640x480 dimensions.

FastStone Image Viewer 4.2

MHz and IPC wins for FastStone, which the single thread speed of the E5-4650Ls do not have.

Video Conversion - Xilisoft Video Converter 7

With XVC, users can convert any type of normal video to any compatible format for smartphones, tablets and other devices.  By default, it uses all available threads on the system, and in the presence of appropriate graphics cards, can utilize CUDA for NVIDIA GPUs as well as AMD WinAPP for AMD GPUs.  For this test, we use a set of 33 HD videos, each lasting 30 seconds, and convert them from 1080p to an iPod H.264 video format using just the CPU.  The time taken to convert these videos gives us our result.

Xilisoft Video Converter 7

Due to the nature of XVC we do not see any speed up against Westmere-EP due to the 33rd video only being assigned a single thread, essentially doubling the time of the conversion.

Rendering – PovRay 3.7

The Persistence of Vision RayTracer, or PovRay, is a freeware package for as the name suggests, ray tracing.  It is a pure renderer, rather than modeling software, but the latest beta version contains a handy benchmark for stressing all processing threads on a platform. We have been using this test in motherboard reviews to test memory stability at various CPU speeds to good effect – if it passes the test, the IMC in the CPU is stable for a given CPU speed.  As a CPU test, it runs for approximately 2-3 minutes on high end platforms.

PovRay 3.7 Multithreaded Benchmark

PovRay is the first benchmark that shows the full strength of 64 Intel threads, scoring almost double that of the 24 thread Westmere-EP system (which was at higher frequency).

Video Conversion - x264 HD Benchmark

The x264 HD Benchmark uses a common HD encoding tool to process an HD MPEG2 source at 1280x720 at 3963 Kbps.  This test represents a standardized result which can be compared across other reviews, and is dependent on both CPU power and memory speed.  The benchmark performs a 2-pass encode, and the results shown are the average of each pass performed four times.

x264 HD Benchmark Pass 1x264 HD Benchmark Pass 2

The issue with memory management and NUMA comes into effect with x264, and the complex memory accesses required over the QPI links put a dent in performance.

Grid Solvers - Explicit Finite Difference

For any grid of regular nodes, the simplest way to calculate the next time step is to use the values of those around it.  This makes for easy mathematics and parallel simulation, as each node calculated is only dependent on the previous time step, not the nodes around it on the current calculated time step.  By choosing a regular grid, we reduce the levels of memory access required for irregular grids.  We test both 2D and 3D explicit finite difference simulations with 2n nodes in each dimension, using OpenMP as the threading operator in single precision.  The grid is isotropic and the boundary conditions are sinks.  Values are floating point, with memory cache sizes and speeds playing a part in the overall score.

Explicit Finite Difference Grid Solver (2D)Explicit Finite Difference Grid Solver (3D)

It seems odd to consider that a 4P system might be detrimental to a computationally intensive benchmark, but it all boils down to learning how to code for the system you are simulating.  Porting code written for a single CPU system onto a multiprocessor workstation is not a simple matter of copy-paste-done.

Grid Solvers - Implicit Finite Difference + Alternating Direction Implicit Method

The implicit method takes a different approach to the explicit method – instead of considering one unknown in the new time step to be calculated from known elements in the previous time step, we consider that an old point can influence several new points by way of simultaneous equations.  This adds to the complexity of the simulation – the grid of nodes is solved as a series of rows and columns rather than points, reducing the parallel nature of the simulation by a dimension and drastically increasing the memory requirements of each thread.  The upside, as noted above, is the less stringent stability rules related to time steps and grid spacing.  For this we simulate a 2D grid of 2n nodes in each dimension, using OpenMP in single precision.  Again our grid is isotropic with the boundaries acting as sinks. Values are floating point, with memory cache sizes and speeds playing a part in the overall score.

Implicit Finite Difference Grid Solver (2D)

Conclusions – Learn How To Code!

For users considering multiprocessor systems, consider your usage scenario.  If your simulation contains highly independent elements and lightweight threads, then the obvious suggestion is to look at GPUs for your needs.  For all other purposes it is a lot easier to consider single CPU systems but scaling may occur if we look at memory management. 

This makes sense when compiling your own code – the issue gets a lot tougher when dealing with third-party software.  Before spending on a large multiprocessor system, get details from the company that make your software (for which you or your institution may be paying a large amount in yearly licensing fees) about whether it is suitable for multiprocessor systems, and do not be satisfied with answers such as ‘I don’t see why not’.

With Crystalwell in the picture in the consumer space, it becomes a lot more complex when dealing with a large eDRAM/L4 cache in a multiprocessor system.  The system will then need to manage the snooping protocols for larger amounts of memory, making the whole procedure a nightmare for the unfortunate team that might have to deal with it.  Crystalwell makes sense in the server space for single processor systems, perhaps dealing with MPI in clusters, but it might take a while to see it in the multiprocessor world at least.  Fingers crossed…!

Comments Locked


View All Comments

  • ShieTar - Thursday, July 4, 2013 - link

    So, the only manufacturer of Quad-CPU-Boards has absolutely no clue of Multi-CPU systems, and is consistently running the wrong OS on his own test installations? Windows Server is a profitable product for MS, it has an existant market-share (see, for an example, ) and it does not exactly cripple Multi-CPU performance for software which does support it. Just look at the PovRay benchmark in this very article, or read some well-written material provided by MS on the topic: .

    Informing people about linux as an option, and clarifying its capabilities and benefits is something I can get behind, but being an obnoxious linux-fanboy won't convince anybody of anything.
  • FunBunny2 - Friday, July 5, 2013 - link

    Well, Windoze is a lame OS, no matter what the fanboys say. OTOH, SQL Server is a very good database, up to its limits. But that means using Windoze. If one goes the *nix way, then Oracle/DB2/Postgres are the databases to choose among.

    Multiprocessor systems are more appropriate as heavy weight (for some definition of heavy) database machines. They can exploit CPU/RAM/SSD more than any other application.
  • Friendly0Fire - Wednesday, July 3, 2013 - link

    And you probably didn't read the bit when he said he was given *remote* access to the server? He can't go about formatting everything like it's his own toy box.
  • coder543 - Wednesday, July 3, 2013 - link

    He tried out multiple versions of Windows Server. He seems to be using a very serious version of Remote Desktop... either that, or he does in fact have access to someone at SuperMicro who can format things for him. But, the most important thing to say about this whole affair: Even SuperMicro, the builders of this desktop, could not get all 64 cores working on Windows.
  • patrickjchase - Thursday, July 4, 2013 - link

    He almost certainly used SuperMicro's IPMI 2.0 KVM-over-IP solution, which provides a remote desktop (including local optical storage and USB proxies) at the HW level. Doing BIOS setup and an OS install from remote DVD media (i.e. the media is physically at Ian's location instead of at the server) is a piece of cake.
  • Kevin G - Wednesday, July 3, 2013 - link

    I've reformatted and installed an OS before with only remote access. It really depends on what kind of remote access that limits a user.
  • Heavensrevenge - Wednesday, July 31, 2013 - link

    You don't need to consider Windows Server in order to run that type of hardware, just get Win 8 on there since it can support up to 640 logical CPU's as I'm aware of. So... yea, I wish Linux gaming was benchmarkable but it really still isn't in terms of graphics performance, only CPU benchmarks would be meaningful but DEF not GPU testing in a Linux distro.
    And anyway, Phoronix does a wonderful job on the Linux side of benchmark land. To see some stupid extreme CPU Task manager action.
  • coder543 - Wednesday, July 3, 2013 - link

    "The main issue moving to 4P was having an operating system that actually detected all the threads possible and then communicated that to software using the Windows APIs. In both Windows Server 2008 R2 Standard and 2012 Standard, the system would detect all 64 threads in task manager, but only report 32 threads to software."

    I found your problem: Windows. When we look at the top500 list, you know what we don't see in cases of HPC? Windows. (and look at Operating Systems)

    Would it kill Anandtech to use Linux once in awhile?
  • coder543 - Wednesday, July 3, 2013 - link

    Also, by the numbers.
    Linux in HPC: 83.4%
    Windows in HPC: 0.6% (0.4% from Windows HPC 2008, 0.2% from Windows Azure)

    Remember, in the top500 list, 0.2% is 1 supercomputer. You do the math.
  • coder543 - Wednesday, July 3, 2013 - link

    and on 2nd glance, it looks like I didn't think to add all of the specific distros into the total.

    Linux in HPC has at least 93.4% of the total top500 market share.

Log in

Don't have an account? Sign up now