Cooler Testing Revisited

Until recently we haven't been very aggressive in testing CPU cooling methods. I'd been busy with notebooks, desktops, cases, and peripherals, but good and consistent writers are hard to come by in this industry, and eventually I couldn't say no. Tentatively, I gave it the old college try, starting with two radiator fan roundups and then doing multiple liquid cooling roundups. Interestingly, it was when more conventional air cooling popped up on my radar that things got complicated.

The cooling testbed was and is solid. We use a 200mm BitFenix Spectre Pro that's throttled to 5V as an intake, and that's in the front of a BitFenix Shinobi XL enclosure, a case which is almost perfect for our needs. The low speed on the Spectre Pro allows for intake of cool air without negatively affecting noise testing, and for closed loop liquid cooling, this is fine. Where things get more dicey is when you introduce an air cooler into the testbed, because as a couple of you rightfully pointed out, without an exhaust fan to direct air, air coolers suffer tremendously performance wise. To be certain I took our original testbed, added a 140mm Noctua fan with a low noise adaptor, and mounted it to the rear exhaust of the Shinobi XL. Even with a minimally powered exhaust fan, the differences in performance were pronounced. Since this is the situation air coolers will typically find themselves in, I'm now using that exhaust fan for testing air coolers. Closed loop coolers continue to do without.

There was one other wrinkle with the existing testbed: our motherboard just wasn't especially stable, and if it crashed, it was difficult to get it to post again. Recently, this became easy to remedy: the micro-ATX board I was originally using for case testing was retired in favor of a full ATX board. Switching over to the Gigabyte GA-Z68MX-UD2H-B3 meant having a more reliable and more fearsome overclock on the Intel Core i7-2700K. Now the chip runs hotter, the socket lines up correctly with the hole in the case's motherboard tray, and it's more stable overall.

Of course all of these changes mean one important thing: a lot of coolers needed to be retested under these more stressful (but also sometimes more ideal) conditions. To be sure, the previous roundups are still useful for comparing products in their individual categories, but now liquid coolers aren't the juggernauts they used to be. Out of the coolers we've already tested, I selected ten to be revisited: five air coolers and five closed loop liquid coolers.

Coinciding with these revisions is our evaluation of Cooler Master's Seidon 240M closed loop cooler along with two new tower coolers from Noctua, the NH-U12S and NH-U14S, both of which were designed to create clearance for memory modules with tall heatsinks. The Seidon 240M is noteworthy because it's not directly sourced from Asetek or CoolIT Systems as many of these products are, and uses a proprietary waterblock design that theoretically improves overall cooling performance.

The Cooler Master Seidon 240M
Comments Locked

62 Comments

View All Comments

  • epoon2 - Friday, April 26, 2013 - link

    wow that was fast, maker updated with editor's choice logo already btw
  • tsponholz - Friday, April 26, 2013 - link

    I don't understand why the Thermaltake WATER2.0 Series doesn't seem to make it to these lists. I have the Performer and love the performance and noise. The review I have seen (never in a round up) put it on top of the Antec and Corsair offerings.
  • karasaj - Friday, April 26, 2013 - link

    Any good places to get the NH-U12S in the US for that 65$?
  • Hrel - Friday, April 26, 2013 - link

    Man, that 30db noise floor is REALLY becoming a problem. You guys would CLEARLY get value/use out of better equipment. I would REALLY REALLY REALLY like to see that happen.
  • Razorbak86 - Friday, April 26, 2013 - link

    Feel free to make a contribution of said equipment to the site's standard test setup.
  • DanNeely - Saturday, April 27, 2013 - link

    When you're buying something to donate; keep in mind getting ambient noise levels much below 30db is easier said than done and an anechoic chamber large enough not to turn into a hotbox during testing isn't going to be cheap.
  • TrackSmart - Friday, April 26, 2013 - link

    Great review. Kudos to Cooler Master for giving us cheapskates something to play with at $33 that will handle some significant overclocking, while also staying quiet. I've usually dismissed aftermarket coolers as being a poor return on investment for mid-range builds (i.e. it is more cost effective to spend the money on a beefer CPU than a bigger cooler). But $33 is a price point where it might make sense to invest in better cooling over a modestly higher-end CPU.
  • crimson117 - Friday, April 26, 2013 - link

    Not sure how you can give a bronze award to such an expensive item - price/performance value simply isn't there. It's 3-4 times more expensive than the Kraken X60 or Noctua but doesn't offer nearly that much improvement.
  • Razorbak86 - Friday, April 26, 2013 - link

    Huh? Where are you getting your pricing? o.O

    In the US, the Swiftech H220 is $139.99, and the Kraken X60 is $109.99. Maybe my math is a little rusty, but I calculate the price premium to be 27% higher (i.e., [$139.99-$109.99]/$109.99 = 27%). If it was 3-4x higher, it would be priced at $329.97-$439.96.
  • Treckin - Friday, April 26, 2013 - link

    Dustin! you promised to include the Antec Kuhler pieces in your closed loop reviews!

    Hope thats still planned!

Log in

Don't have an account? Sign up now