Introducing the 2013 Closed-Loop Cooler Line-Up

While closed-loop liquid coolers seem to perform at best comparably to the highest end air coolers, there's a certain appeal in their flexibility, stress on the motherboard, and sometimes even in cost. Prolimatech's industry standard Megahalems starts at $70, and that's before you even put halfway decent fans on it. Meanwhile, closed-loop coolers are getting to the point where you can find them for under $60. One of those is Corsair's H55, just one of the coolers we have in for review today.

Of course, in addition to the H55, Corsair has refreshed their H60, H80, and H100s with the H60 2013 Edition, the H80i, and the H100i. The "i" designates Corsair's Corsair Link technology, software that allows you to control fan speeds from within Windows as well as potentially integrate and monitor other Corsair peripherals. Not to be outdone, NZXT hit us with two coolers based on 140mm fans instead of 120mm: the Kraken X40 and X60. With a 280mm radiator, the Kraken X60 could very well be the best closed-loop cooler available.

This is all just surface, though. The reality is that these new coolers are almost uniformly indicative of an evolution of this product type as a whole. Corsair's H80i and H100i integrate with their existing Corsair Link software (also supported by their "i" series power supplies), while NZXT's Kraken coolers also include USB headers and their own fan speed control software. This kind of integration alone is a smart differentiation point from air coolers.

They need it, too. What's important to keep in mind is that while there's some special sauce for the waterblocks, software, and fans from the vendors of these units, we're still ultimately looking at systems that are built by either CoolIT Systems or Asetek. You can tell who's responsible for which unit, too, just by the way the waterblock mounts to the motherboard. We may have six coolers in for review (as well as last year's incumbent, the Corsair H80), but there are only two different mounting systems. Everything else is just mounting the radiator and connecting the fans/USB headers.

  Corsair H80 (2012) Corsair H55 Corsair H60 (2013) Corsair H80i
Type 120mm 120mm 120mm 120mm
Dimensions (in mm) 120x152x38 120x152x27 120x152x27 120x152x38
Fans (Supported) 2 (2) 1 (2) 1 (2) 2 (2)
OEM CoolIT Asetek CoolIT CoolIT
MSRP (NewEgg) - ($89) $69 ($59) $79 ($76) $109 ($109)

  Corsair H100i NZXT Kraken X40 NZXT Kraken X60
Type 240mm 140mm 280mm
Dimensions (in mm) 120x275x27 138.4x172.5x27 138.4x312.5x27
Fans (Supported) 2 (4) 1 (2) 2 (4)
OEM CoolIT Asetek Asetek
MSRP (NewEgg) $119 ($104) $99 $139

NZXT's coolers aren't available to mass market just yet, and we just got these review units in not too long ago. 140mm fan support in enclosures is fairly uncommon and dual 140mm even less so, but many of you seem convinced and I do agree that 140mm is really the direction things should be and are going.

At first it seems like there's a pretty brutal premium on NZXT's coolers, but it's not as bad when you look at what they're competing against. The X40 is really facing off with the H80i, which is selling for a pretty hefty $109, while the X60 is doing battle with the H100i. Since the X60 is basically the largest closed-loop cooler you can buy (or at least will be), it makes sense that it would also be the most expensive. Let's hope for NZXT's sake it's also the best performing.

Ease of Installation
Comments Locked

68 Comments

View All Comments

  • Death666Angel - Friday, December 28, 2012 - link

    Maybe different people need different things? The big heatsinks that can compete with these watercoolers usually weigh a lot, restrict access to other components and stress the mounting system. Some also don't fit in all cases because of the width of the case being too shallow (my Scythe Mugen 2 did not fit without the sides of the case bulging out) or they don't fit with certain RAM modules or motherboard coolers.
    Also, is your heatsink/fan really silent or just silent enough for you? How are the temperatures? Some people like having their CPU under 50°C, others are fine with 90°C. With a better heatsink, could you get higher clocks our of it? I know I could go from 3.3GHz (i7 860) to 3.8GHz stable with my watercooling setup (non-AIO).
    Also, no one if forcing you to buy these coolers to replace yours....
    And lastly, do you _know_ that these radiators are more surface than a high end aircooler? Because current day tower coolers that may use 2 140mm fans have a lot of surface and my guess is they are at least equal to these higher end watercoolers.
  • HutchinsonJC - Wednesday, December 26, 2012 - link

    Where is the original h100 on the graphs?

    Why are there so many colors on the graphs? The legend shows a dark blue and a light blue, yet there is red, orange, and green in the charts with no seeming rhyme or reason.
  • ypsylon - Wednesday, December 26, 2012 - link

    It is the problem of all these AIO kits. Mixing aluminum radiator with copper block = degraded performance over time (it is just chemistry cold and unsympathetic). And it is impossible to replace radiator without voiding warranty. Also performance for the price is not exactly top notch. One of the reasons why custom (well big word as you can buy pre-prepared kits and mount everything in the box without any customization actually ;) ) loops more expensive. Copper is expensive and performance always cost. Of course there is 100% difference between H100i and cheapest 240 pre-prepared kit from example EK or XSPC. But over time performance and fully modular setup is well worth extra $$$. Simple as that.

    As I see it, AIO have only one advantage over air cooling, and that is you don't need behemoths like Phantex/Noctua/Thermalright dual-tower coolers. All of them are extremely heavy, able to deform the board/cpu socket/ memory banks circuitry (like on s1366 which was fairly common) or break it completely. One of the areas where big is not exactly best.
  • rrohbeck - Wednesday, December 26, 2012 - link

    I'd like to see some of the better air coolers on the chart. In the few tests that had both, the top end air coolers generally were in the vicinity of the H100.
  • Hood6558 - Wednesday, December 26, 2012 - link

    Very good article, and highly relevant to those of us awaiting availability of the Krakens. Nice to see that they're apparently worth upgrading to, if only for 3 or 4 degrees at load, every little bit helps. Disappointed in the H100i numbers (I'm currently running an H100), how did they lose performance by going with bigger hoses, improved waterblock & pump, and supposedly better fans? Because in all previous reviews, the H100 was champ or at least in top 3. One Point to Corsair for more mature software. Now the big question is, do the NZXT offerings have more clearance issues due to their wider rads - the answer being "of course they do". My H100 in my Carbide 400R just barely clears the VRM heatsink with just 2 fans (I mounted the "pull" fans outside the case) and you have to remove fans to access the CPU fan headers. Of course, that's using the stock centered mounting holes - it's possible to mount the rad offset by lining up some of the holes in the honeycomb with mounting holes - not possible with 140mm rads. I'm pretty sure that in my case, it will hit the heatsinks unless I drill holes and mount as far to the left of center as possible.
  • mayankleoboy1 - Wednesday, December 26, 2012 - link

    Why not use a Ivy bridge CPU ? At 4.5 GHZ, and 1.3V, they get very hot very quickly.
  • vanwazltoff - Wednesday, December 26, 2012 - link

    i would really like to see how these closed loops compare to the incoming cooler master eisberg
  • jonyah - Wednesday, December 26, 2012 - link

    I think money is well spent on a closed loop water cooler. The less stress on the MB, great cooling performance (on par with equally priced heatsink/fans) and low noise level is definitely worth it. If you're putting in a $300+ cpu, it makes sense to take care of it. I've had the H60 for 12 months now and it has performed flawlessly. If you compare it's cooling to the stock cooler it came with (complete crap), it's incredible.

    I think the article would be better served to include benchmarks of non-water coolers to show how great these really are. I was running in the 70+C range with the stock cooler while pushing it, and now can't push my chip above mid 40's. That alone will keep my chip lasting a lot longer (though I'm probably going to be upgrading it soon).
  • A5 - Thursday, December 27, 2012 - link

    Stock coolers are garbage, everyone knows that. But a $70 air cooler would outperform the H60.
  • vectorm12 - Wednesday, December 26, 2012 - link

    Thanks for all your hard work Dustin.

    As some have already pointed out there's little difference in performance of these coolers and the traditional Aircoolers. However what I&ve been dying to find out all this time is how much internal temps is reduced by the direct exhaust of these kits?

    If they are efficient enough it should allow a case to support more TDP in the form of GPUs, Raid-controllers and HDDs. I've also always wondered what happens to the airflow around VRMs and DIMMs when the fan at the socket is transplated. Of course different cases will result in different results but it's still something I'd consider worth looking into.

    In a future review I'd very much like to see some values relating to the temps of motherboard,DIMMs, VRMs and so on as well as the effects of transplanting the CPU-fan

Log in

Don't have an account? Sign up now