While I was at CTIA last week I ran into a friend from Kingston who let me know about an issue with the JMicron JMF618 based SSDNow V100 SSDs that were released last year. We never formally reviewed the V100 here on AnandTech but I've tested the drive and we've occasionally included scores from it in our reviews.
With the original firmware on the V100 there's apparently a chance you could lose data. Kingston wouldn't go into specifics other than the usual "this only impacts a small percentage of users" line we typically get with things like this. Kingston has an updated firmware that apparently fixes the problem available here.
Note that I never saw the original issue and I just now got access to the fixed firmware, so approach with caution. If you own a V100 drive back up and give this thing a try.
The full release from Kingston is below:
We have learned that a small percentage of our SSDNow V100 sold in the past has experienced a technical issue on the firmware. Kingston strongly recommends that a firmware update be applied to all SSDNow V100 drives to prevent possible data loss.
The firmware update to fix the technical issue is available via Kingston Technical Support. As with any firmware update, we recommend that you back up your data prior to applying the firmware revision.
Customer satisfaction and producing high quality products is the key to Kingston’s success, so we want to make every effort to ensure that our customers are aware of this firmware revision and have the opportunity to patch their V100 drive(s).
Customers can also contact our customer service hotline at 888.484.9125 for more information.
Affected Part Numbers are:
SV100S2/64GZ, SV100S2D/64GZ, SV100S2N/64GZ
SV100S2/128GZ, SV100S2D/128GZ, SV100S2N/128GZ
SV100S2/256GZ, SV100S2N/256GZ, SV100S2N/256GZ
It is important to note that none of Kingston’s other SSDNow products -- with part numbers beginning with SNE, SNM, SS, SNV, SNVP and SVP -- are affected by this potential issue.
Post Your CommentPlease log in or sign up to comment.
View All Comments
softdrinkviking - Tuesday, March 29, 2011 - linkah. JMicron. thought it was a typo, never knew there were two separate companies.
yesh, guess i'll steer clear.
Nentor - Wednesday, March 30, 2011 - linkDitto. It controls two SATA ports on my P45 board. Just altogether weird behavior (suddenly all kinds of programs from Quintessential Player to VLC become unresponsive after reading an audio cd from a cdrom player attached to a sata port controller by the Jmicron chip) with the drivers that come with Windows or their own drivers.
I'd never think about hooking up a HD to it after reading all the problems with it, but I thought a cdrom player would be OK.
Their drivers now are WHQL (riiight), but I wonder if they simply bought that?
Pessimism - Tuesday, April 5, 2011 - link+6
Agreed. I've ranted before on JMicron related articles regarding their terrible, terrible products. I feel dirty owning a netbook with one of their card readers, and they didn't even do that right (it often decides not to read the card until you insert it a few times).
Let us all be thankful that they have not reached the market penetration level that Realtek has. Crab audio, crab ethernet, crab wireless, crab system management ICs... at least Realtek's stuff is usually passable for light use and their driver updates are pretty frequent.
TrevorH - Tuesday, March 29, 2011 - linkI don't believe there is any connection between JMicron and Micron apart from 6 letters.
howsthecake - Tuesday, March 29, 2011 - linkSo, Kingston issues a firmware update for a rare problem, and AnandTech makes it front-page news. OCZ knowingly passes off inferior, slower, smaller drives as Vertex 2, and AnandTech does absolutely nothing to notify its readers when OCZ finally fesses up and agrees to replace drives.
Gabelooo - Tuesday, March 29, 2011 - linkI did have the problem. Kingston sent me RMA docs for sending the drive back through fedex (free of charge). Had to email them back after a while to know what was going on, and they ended up telling me no more v100 were available, so they shipped me a v100+
Point is, whenever I setup a system with an SSD boot drive and a large data drive, I always keep a 64 gigs unallocated partition on the big data drive. When your SSD fails, you can install windows to that partition while you wait for a replacement.
derektrotter - Wednesday, March 30, 2011 - linkI have it on good authority that the Kingston drives would occasionally respond to a TRIM command by TRIMming (erasing) a different block than you asked to be erased. This would of course result in data loss.
This problem was reported (with information to prove it true) by an associate of mine to Kingston many weeks ago.
Most likely this fix is related to this.
danzi88 - Wednesday, April 6, 2011 - linkhello everyone,im wholesale supplier online
Welcome to our website
===== http://www.goodshopping.us/ =======
accept paypal or credit card and free shipping
We need your support and trust!!!
Dear friends, please temporarily stop your footsteps
To our website Walk around A look at
Maybe you'll find happiness in your sight shopping heaven and earth
You'll find our price is more suitable for you.
=== http://www.goodshopping.us/ =====