Introducing the SilverStone GD04

My media center PC was far from old and decrepit, but I wound up with an opportunity to both rebuild it into something faster and cut a profit this month and went for it. Choosing a case for the new build was a difficult decision; the old CoolerMaster Elite 360 case I used still ranks among my favorites for budget machines, but the lack of any kind of vibration-dampening optical drive mounting resulted in my blu-ray/HD-DVD drive progressively producing more and more noise. I decided to go for something sexier, something more suited to being an HTPC case, and after doing a fair bit of research I picked up the SilverStone GD04.

The GD04 is remarkably attractive if you're into that minimalist look (I am); there's a sister GD05 model that has a full 5.25" drive bay instead of just an opening for the optical drive tray, but rather than have unsightly electrical tape covering up the activity LED on the drive I opted to bury it in the case with the GD04. Otherwise the two models are functionally identical, so a lot of what's said in this review will likely apply to the GD05. This case has also been around for a couple years but doesn't seem to have been refreshed by SilverStone; if it ain't broke, don't fix it, right?

SilverStone GD04 Specifications
Motherboard Form Factor Micro ATX, Mini ITX
Drive Bays External 1x 5.25” (partially covered by bezel)
Internal 2x 3.5” or 2.5"
Cooling Front -
Rear -
Top -
Side 1x 120mm intake (left), 2x 120mm intake (right)
Bottom -
Expansion Slots 5 (4 main, 1 accessory)
Front I/O Port 2x USB 2.0, 1x Headphone, 1x Mic
Power Supply Size Standard ATX
Weight 12.21 lbs.
Dimensions 5.91” x 17.32” x 12.72”
In and Around the GD04
Comments Locked


View All Comments

  • Alexvrb - Saturday, December 25, 2010 - link

    Actually I thought he brought up some valid concerns. If you're going to bother testing an HTPC setup, do it right. Maybe he went a little overboard, but he still makes some good points. For one, I'd rather know how loud and what pitch it makes from the front. It's an HTPC, it's gonna sit on a shelf and directly face you.
  • JarredWalton - Sunday, December 26, 2010 - link

    I understand what some of you are getting at, but I think you're missing the point here. We are reviewing a case, and we are not trying to make a silent system. That might be something for another article, but this is a review of a case as-is, which means using what they provided. The noise levels were bad enough that Dustin bought a fan control unit, but the goal wasn't to create the ultimate silent PC.

    I've asked Dustin to update the article with additional details on the testing environment and equipment, so that will probably happen after the Christmas weekend. Again, however, we're starting out with some new case reviews and Dustin has a testbed he'll be using. I'm not sure an anechoic chamber with higher sensitivity equipment is all that useful considering I've had plenty of PSUs that apparently rate "20dB" where I can easily hear them in a normal system. Anyway, give Dustin a chance to put together a few reviews and we'll hopefully establish the testing environment so that the comparison point is clear.
  • RobertR13 - Sunday, December 26, 2010 - link

    Can we get him to either use the same internals or test the cases without any internals with just the power supply being jumped, and with the same power supply for every test, so we can at least compare results from one test to another?

    I would be perfectly happy without a sound box, so long as the noise floor is listed at the time of testing.

    Thanks Jarred.
  • Belard - Tuesday, December 28, 2010 - link

    When it comes to PSUs, they could use a fanless PSU model for noise testing alone.

    The review with the stock FANs are valid, but it should be shown that using better fans/controls can fix it. For $100 - its a rather high end case at a low-cost price so Silverstone went with crap fans... when they might as well gone with none.
  • micksh - Sunday, December 26, 2010 - link

    The article title has "not quiet" in it.
    It will never be quiet until you choose right components.
    The title looks like it's the case to blame but in fact it was selection of components. No HTPC case will silence vacuum cleaners or airplane jet engines you put in it.

    "this is a review of a case as-is, which means using what they provided"

    Case fans as they provided as-is were quieter or louder than power supply, for example? The article doesn't tell even that. Why?

    "We are reviewing a case, and we are not trying to make a silent system"

    Not even trying to make it silent?
    What is the point of loud system in living room when someone wants to watch movies?

    "but the goal wasn't to create the ultimate silent PC."

    Understood, but it has to be reasonably quiet in order to be used as HTPC.
    Otherwise, what's the point?
    You can just turn on head dryer in background and see what effect it has on viewers.
    Was your system louder or quieter than head dryer? Need comparison measurements.

    Practical value of this review is what? This case works, here are photos, it can be done, we proved it, it's like your any other HTPC case, but we don't know anything else. Did I miss anything?
  • JarredWalton - Monday, December 27, 2010 - link

    Obviously the case fans are a major noise contributor, considering that adding a fan control unit to slow them down dropped total noise from 41.6dB down to 36.3dB. The question is how much of the remaining noise is from the PSU, GPU, CPU, etc. Fanless components would be ideal for the other areas, but fanless generally means slower (or exotic cooling) so you can't always go that route without becoming a skewed look at cooling, noise, and performance.

    The Athlon II X4 640 certainly isn't the lowest power CPU on the market, but it also doesn't draw a ton of power. The GTS 450 is in the same boat. These are mainstream parts good for a look at the "typical" experience.

    The fact of the matter is that this is an HTPC case, and a major source of noise is the fans. However, I'd also say that running three 120mm fans in most cases is overkill. I'll discuss some ideas with Anand and Dustin to improve the overall approach; the major issue right now I think is that while AnandTech in general has a ton of hardware at our disposal, Dustin doesn't have all that much.

    Perhaps what will be best is a two-pronged review approach where we have a "lower power/noise" testbed as well as a higher end configuration, and using both we can provide a look at a range of performance options with each case... but putting together two systems for each case review can be a pain. I think Robert's suggestion above about testing with no hardware other than the case fans also has merit, though we'd need some sort of PSU to do that. There are hybrid models where the fans don't spin until at least a ~300W load that we could use for such testing.

    Anyway, we'll be looking at feedback and working to improve the case reviews, but I'm not sure how long it will take to sort things out. Stay tuned....
  • RobertR13 - Monday, December 27, 2010 - link

    While most of those points are vague and refutable at best, they're all completely besides the point. If you're going to advertise an article as a case review based on the case, "as-is" you can't stuff it with a bunch of random hardware, publish a bunch of pretty numbers that you can't compare to anything, and call it objective. That is my entire point.

    For PSU, there are a LOT of completely fanless options, and passive means essentially no noise. Grab a PicoPSU, up to 150W, jump the ATX connector with the fans attached and you will have an idea of what the case sounds like empty.

    Or if he can wire a little bit, grab a $5 12v inverter from Walmart or Radioshack, cut off the end, wire on a molex plug and use a Y adapter to power just the fans. I even have one here, I could clean up, heatshrink and send out, I found it at Fry's electronics and allows you to manually set the voltage at about six different levels, four of them up to 12V, so you can even test the stock fan sound levels at different voltages as though they were on a switched fan controller.
  • micksh - Monday, December 27, 2010 - link

    I think they at Anandtech understand it now.

    No need to go completely fanless as this would limit your PC too much. There is a lot of stuff that you can't do with 150W PicoPSU.

    This is HTPC. For good HD image quality you need some image enchancement that video card does. Low powered video cards just can't do that.
    See this:
    There are also video quality reviews from other sites like They show that realistically, around 70W or more TDP video card is required for better video quality. Then there is 65-73W for CPU for smooth experience, then chipset, storage, etc... Then if you think of future proof design 150W PicoPSU should be out of question.

    It may change when/if Sandy Bridge graphics proves that it's good enough for HTPC but we are not there yet.
    Yes, there are passive PSUs with 400 and more watts of power. But they don't dominate on the market for some reasons. I think it should be a subject for a different discussion.
    My opinion is why limit yourself when you can have quiet system with lots of power and quiet fans?
  • micksh - Monday, December 27, 2010 - link

    "Obviously the case fans are a major noise contributor, considering that adding a fan control unit to slow them down dropped total noise from 41.6dB down to 36.3dB."

    Yes, that sounds obvious but then during load noise levels quickly jumped to 39.4 dB with low fans. Noise contribution from different components can be quite complex. And it depends on position where you measure noise. Yes, case fans seem to be the worst guys. But next obvious step to me would be to stop them one by one with fingers and to verify where the noise is coming from.

    "The GTS 450 is in the same boat"

    I think you are oversimplifying here. There is no just GTS 450 card. There are different GTS 450 models from different vendors. The amount of noise these models produce may vary from inaudible to intolerable. With price difference like $10 between them. I don't know about your EVGA card.

    Thanks, I see that you are on the right track. Will stay tuned.

    Besides, Anand himself didn't show pictures of his home theater setup for a while. What HTPC is he using? From the pictures that I saw I don't think he had to make compromises that would result suffering from loud HTPC.
  • RobertR13 - Sunday, December 26, 2010 - link

    I don't see why you have to result to insults and name-calling, but so be it. I don't see why being annoyed that a test being presented as fact, while being completely subjective is petulant or childish, but sure, whatever makes your christmas better.

    1: There are no other Case testers at Anandtech anymore. The last series of case tests we saw ended in February of 2009, using different internals and at a different location, without any testing methodologies being reported. This is the second article by this author, and while his testing methodology is similar, the internal components are completely different, making the results completely non-comparable.

    2: Fair enough. It's completely non-real world, but sure, it would be fine if it were just being used as a reference point to compare cases, but we can't compare results between this and any other article.

    3: Noise is additive actually, both in frequency and decibels, that's why other testers here at anandtech use a soundbox for testing power supplies.

    4: Again with the insults, you couldn't just refute the point or skip over it?

Log in

Don't have an account? Sign up now