The latest entry level SSD from Samsung has no suffix and bears neither the PRO or EVO appellation. It is a new entry-level SATA SSD featuring Samsung's latest 64-layer 3D TLC NAND, making it a very close relative to the 850 EVO line.

The Samsung SSD 850 120GB Review: A Little TLC for SATA

The SSD 850 120GB uses the same MGX controller as the 850 EVO, but with a newer generation of 3D NAND. The drive is intended to fill a gap that has existed in Samsung's retail product line since the 750 EVO was discontinued a little over a year ago, as it left Samsung with no 120GB-class retail SSD. So far, the SSD 850 120GB has only been officially released by Samsung's Chinese division, but it is available in other Asian markets including from some online retailers that will ship to us in North America. The release it seems will be staggered across regions.

The Samsung 750 EVO was a stopgap product, using 16nm planar TLC, while the 850 family transitioned from 32-layer to 48-layer 3D NAND. That transition for the 850 series doubled the capacity per die, from 128Gb to 256Gb. With half as many dies to use in parallel, the smallest capacities of the 850 PRO and EVO would no longer meet the same performance specifications. Changing components like this without renaming the product can be controversial, but Samsung took the reasonable route of discontinuing the 128GB 850 PRO and 120GB 850 EVO. It was their hope that the 120GB capacity class would be rendered mostly obsolete by the price/GB improvements enabled by denser 3D NAND.

When Samsung's 48L 3D NAND initially failed to reach its production or price targets, it became clear that Samsung still needed an affordable 120GB-class drive in its retail lineup. The 750 EVO was introduced to fill that gap, using 16nm TLC but retaining the same top-notch SSD controller from the 850 series. The 750 EVO initially debuted with 120GB and 250GB capacities, but a 500GB version was added as SSD prices began to rise across the industry due to a global shortage of NAND flash memory. (The disappointments of Samsung's 48L 3D NAND were one of the major supply-side factors leading to the shortage, but insatiable demand for SSDs and the difficulties everyone else had bringing any kind of 3D NAND to market were also very important contributors.) By the end of 2016, SSD prices were still rising but Samsung quietly discontinued the 750 EVO, again leaving them with a gap at the smallest end of the capacity range.

The Samsung SSD 850 120GB is a product that Samsung never wanted to release, and it may even never see a global release. The fundamental challenge of offering 850 EVO-class performance on a drive with just four NAND flash dies hasn't gone away. Samsung's 64L 3D NAND is claimed to be a bit faster than the 48L NAND for writes, and power consumption is supposed to be lower for both reads and writes. This won't do much to offset the effects of limited parallelism with only four NAND dies.

Samsung TLC SATA SSD Comparison
Drive 850 120GB   750 EVO 120GB 850 EVO 120GB
Launch China: Nov 2017   April 2016 December 2014
Controller Samsung MGX   Samsung MGX Samsung MGX
NAND Samsung 256Gb 64L TLC V-NAND   Samsung 128Gb 16nm TLC Samsung 128Gb 32L TLC V-NAND
DRAM 256 MB   256 MB 256 MB
Sequential Read 540 MB/s   540 MB/s 540 MB/s
Sequential Write 520 MB/s   520 MB/s 520 MB/s
4KB Random Read 70k IOPS   94k IOPS 94k IOPS
4KB Random Write 88k IOPS   88k IOPS 88k IOPS
4KB Random Read QD1 10k IOPS   10k IOPS 10k IOPS
4KB Random Write QD1 40k IOPS   35k IOPS 40k IOPS
Encryption AES-256, TCG Opal 2.0, IEEE-1667 (eDrive)   AES-256, TCG Opal 2.0, IEEE-1667 (eDrive) AES-256, TCG Opal 2.0, IEEE-1667 (eDrive)
Endurance 75TB or 100TB   35TB 75TB
Warranty Three years   Three years Five years

Like the 750 EVO, the Samsung SSD 850 120GB inherits all the 850 EVO's features like TCG Opal support thanks to using the same controller, but the 850 120GB's three year warranty is shorter than the five years on the 850 EVOs. The write endurance is thankfully on par with or better than the old 120GB 850 EVO (Samsung China's site is inconsistent about this specification), whereas the 750 EVO had less than half the write endurance. The only performance specification where the 850 120GB is slower than the old 850 EVO 120GB is for random reads at QD32, where it has lost 25% of the peak performance. However, performance numbers on the box like these do not tell the whole story.

A Lot of Empty Space

The Samsung S4LN062X01 "MGX" controller in the 850 120GB is old news. After three years on the market in the 850 EVO and related OEM and enterprise SSDs, it's still one of the top SATA SSD controllers with all the expected features and great performance and power management.

While the 750 EVO put the controller and DRAM in the same BGA package, the 850 uses the original controller packaging with the DRAM next to it on the circuit board. The Samsung SSD 850 120GB uses the same PCB as current 850 EVOs up to 500GB, with one of the two NAND package spots populated, and the case is Samsung's standard matte black metal secured with three pentalobe screws.

Samsung's NAND flash part numbers don't directly encode the manufacturing process used. The sole NAND package on the 850 120GB is marked K9CKGY8H5A. The "CKG" portion identifies this as a TLC package with four dies and a total capacity of 128GB, implying the use of 256Gb (32GB) dies. The "A" at the end of the part number designates this as Samsung's second generation of 256Gb TLC parts. The first generation of 256Gb TLC dies from Samsung was manufactured with their 48-layer V-NAND process, making this new part their 64-layer design. When Samsung gets around to shipping their 512Gb 64L TLC dies, they'll be marked with a "M" at the end of the part number because they are Samsung's first generation 512Gb TLC parts.

This isn't our first encounter with Samsung's 64-layer fourth-generation 3D NAND. The Samsung Portable SSD T5 launched earlier this year as the first product to feature the 64L TLC V-NAND. Samsung used a portable SSD as the trial run for their preceding 48-layer 3D NAND as well, followed by a gradual migration of the rest of the product line. Samsung hasn't stated whether they plan to migrate the 850 EVO line over to 64L TLC in the same manner as they transitioned it from 32L to 48L, but I suspect they will. SATA SSDs aren't going away any time soon, and the current 850 EVOs are already competitive with the 64L 3D TLC SSDs from Western Digital/SanDisk and Intel. Updating the 850 EVO with 64L 3D TLC won't hurt the small capacity models because the capacity per die remains 256Gb.

The future of the 850 PRO line and MLC drives in general is less clear. Samsung has said nothing about 64L MLC and even their enterprise SSDs are all on TLC now (except for the Z-NAND based SZ985). The 850 PRO has very little reason to continue existing now that NVMe drives are the high-performance option, so Samsung may end up discontinuing it and simplifying their retail SATA line to just a range of TLC-based 850s, starting with this 120GB model. In the NVMe space they will probably keep a MLC model around for enthusiasts unless their next generation of TLC-based NVMe SSDs can deliver huge performance increases. We expect Samsung to officially disclose some of their plans early next year, either at CES or shortly thereafter.

There isn't much competition in the 120GB capacity class of SSDs. Other manufacturers have also largely abandoned this segment as they transition to 3D NAND with per-die capacities of 256Gb and larger. The only recent SSDs we have to compare against are a few drives using Micron's 384Gb 32L 3D TLC NAND. The first two, the ADATA Ultimate SU800 and the HP S700 Pro, pair that Micron NAND with the Silicon Motion SM2258 controller, while the other member of the set is the HP S700, which adopts the DRAMless SM2258XT controller. The rest of the 120GB-class drives we have tested are all discontinued: the Samsung 850 PRO 128GB, the Samsung 850 EVO 120GB, the Samsung 750 EVO 120GB, the ADATA SP550 using planar TLC, the PNY CS1311 also using planar TLC, and the ADATA XPG SX930 which uses planar MLC and a JMicron controller.

The glaring omission from this review is the Crucial BX300. Micron used their 3D MLC for this model specifically designed to perform well at low capacities, but then they only sampled us the largest size to test. The 120GB BX300 is currently priced very well for a 120GB drive even before taking into account that it uses 3D MLC instead of TLC. It's also readily available for purchase in most markets. Based on the results at higher capacities, we expect the 120GB BX300 to be slightly below 

AnandTech 2017 SSD Testbed
CPU Intel Xeon E3 1240 v5
Motherboard ASRock Fatal1ty E3V5 Performance Gaming/OC
Chipset Intel C232
Memory 4x 8GB G.SKILL Ripjaws DDR4-2400 CL15
Graphics AMD Radeon HD 5450, 1920x1200@60Hz
Software Windows 10 x64, version 1703
Linux kernel version 4.12, fio version 2.21

Not all of our regular benchmarks are performed in this review to begin with. Our test called 'The Destroyer' is slightly delayed - on the first run through, the SSD 850 returned suspiciously low scores, so it is currently being re-run. ATSB on the 2017 testbed for a few other 120GB drives were also not at hand due the drives being in service as boot drives on other testing machines. The page of results for The Destroyer will be added later today (11/27).

AnandTech Storage Bench - Heavy
Comments Locked


View All Comments

  • lilmoe - Monday, November 27, 2017 - link

    Oh, and so are the Pros... hmmm.
    Is that a holiday discount or is it that I haven't checked the price in a while?
  • Arbie - Tuesday, November 28, 2017 - link

    Great article, even though its subject is a minor league item. AT quality.
  • bug77 - Tuesday, November 28, 2017 - link

    That's the ugly face of SSD: the cheaper they make them, the more we lose durability and access speed...
  • bcronce - Tuesday, November 28, 2017 - link

    Still 1000x faster than a mechanical drive, perceptibly as fast as any other SSD for most situations, and will last a lifetime.
  • mapesdhs - Wednesday, November 29, 2017 - link

    Definitely will not last a lifetime, and some newer models can have worse steady state performance than a rust spinner.
  • bcronce - Wednesday, November 29, 2017 - link

    Even the infamous Samsung 840s were still out-performing 15k SAS drives in their degraded modes. I see free "crackerjack" USB 2.0 flash drives out performing my 7.2k RPM rust buckets.
  • MamiyaOtaru - Thursday, November 30, 2017 - link

    no you don't
  • yifu - Saturday, December 2, 2017 - link

    power efficiency test please
  • yifu - Sunday, December 3, 2017 - link

    Billy , I would really want to see , is not only the speed , but the power efficiency for a older laptop like my MacBook Pro 13in 2012. if some one really care about speed , they will go for 850 pro 850 EVO, or PCIE. my gaming PC is with 960 pro for windows and 850 evo for storage. my iMac for work is with apple PCIE and a Toshiba HK4R 960GB (power lost protection). SATA speed for a ssd is done.the speed difference between those cheap SSDs are to small.
    I am thinking to "upgrade" my MacBook Pro mid 2012 from 840 pro to a slower but very very power efficient SSD.
  • finefunny - Sunday, December 3, 2017 - link

    The company has already released several new versions of its OEM models, such as the PM871b, with 64-layer V-NAND. These drives often sell in basic systems from Dell, Lenovo, and other OEM brands. Customers often do not select the components in those systems, so the OEM models fly under the radar.
    Samsung isn't saying much for now, but it should answer our questions in early 2018. That's when we expect it to roll out new retail SSDs.

Log in

Don't have an account? Sign up now