The Zalman Z-Machine ZM-K700M Mechanical Keyboard

At first sight, the ZM-K700M appears to be a simple, typical PC keyboard. Zalman is using a plastic matte black body, matching the material of the keycaps. The plastic construction hides the metal support frame on which the keys are attached on. Only the five extra keys to the left of the keyboard and the four media keys above the numpad clearly stand out as irregular. It would be difficult for someone who is not adept with keyboard designs to visually tell the difference between the ZM-K700M and a standard, electronic keyboard.

The five keys to the left of the keyboard are reserved for macro and special functions, but there is no extra software for their programming. Macros are being recorded and set "on-the-fly", using key combinations. These five keys are the only ones with hexagonal keycaps. The rest of the main keys are using normal cylindrical keycaps. Four more extra keys can be found above the numpad, which are primarily used for volume control but can also emulate mouse clicks. The fourth key is used to enable or disable the "Z-key mode", which essentially disables all of the keyboard's extra functions if connected via USB.


Zalman also replaced the right windows key with a FN key that, in combination with other keys, initiates the special function printed in red on the keycaps. The combination of the FN key with the number keys controls the backlighting settings, the F1-F4 keys provide quick launch/search options, the F5-F8 keys media controls and the F9-F12 keys adjust the repeat rate of the keyboard. The FN+CTRL combination locks the keyboard and the FN+Win key locks the Windows key. Other interesting shortcuts is that FN+G launches and FN+H links to the online user's manual, which are not printed on the "G" and "H" keycaps of the sample that we received. Finally, another shortcut that does not use the FN key is the double press of the Numlock key, which launches the calculator application.

If the Z-Key mode is enabled, essentially only the three first macro keys can hold macros; the fourth macro key initiates a loop mode and a fifth key an auto mode. Technically, the loop mode and the auto mode are both looping modes, with the difference being that the auto mode does not hold any timing intervals and registers any key sequence repeatedly and at once. If the Z-Key mode is disabled, all five keys can only store timed macros. If a macro has been programmed and stored in any of the standard macro keys, the timing intervals have also been recorded. However, it is possible to adjust the time intervals via the FN+arrow keys combinations (up to 10 times faster or up to 65 seconds maximum.

A highly advertised feature of the ZM-K700M is the LED bar indicator at the right side of the keyboard. The base function of this bar is to be a visual indicator of the typing speed, but it also displays any volume level changes, the brightness of the backlighting and the speed of the running macro.

The backlighting of the ZM-K700M is very strong and focused on the characters only, with minor "bleeding" around the top of the keycaps. In order to keep both the primary and the secondary characters illuminated, Zalman moved the secondary character (of the keys that have one) to the top half of the keycap. The volume control keys and the FN key are not illuminated. An illuminated logo of the company can be found on the Space Bar key.

There are a few of backlighting settings and effects that the ZM-K700M can process. The backlighting can cover the entire keyboard, light only specific keys or perform special effects, like a "breathing" effect for the entire keyboard or a "wave" effect that illuminates the pressed key and the surrounding keys. There is also a "mask" mode, which turns the backlighting on only on specified keys and then only those keys can be pressed.

Beneath the keycaps, we found Cherry's original MX Red switches with white LEDs attached to them. The keys are mounted on a metallic frame that provides high mechanical strength, a usual setup for high quality mechanical keyboards. Larger keys have extra cross supports that minimize wiggling and balance the actuation force of the key.

Under the keyboard we found large rubber anti-skid feet that make it almost impossible for the ZM-K700M to slip while sitting on a metallic, glass or wooden surface. Zalman also installed two sets of feet, one inside the other, allowing for two tilt adjustments.


After dismantling the keyboard, we found a standard, green, well-made PCB, without any assembly imperfections. The core of the keyboard is a Nuvoton NUC120LD2DN Microcontroller. It is a 32-bit model that features a 50 MHz processor and 64 kB ROM. It is not the most advanced microcontroller available, but sufficient for the capabilities of the ZM-K700M.

Introduction, Packaging & Bundle Quality Testing
Comments Locked


View All Comments

  • tarqsharq - Thursday, February 4, 2016 - link

    Yeah, it might be nice if you're playing one of those third party "Vanilla WOW" servers that run old old old pre-command queue builds.
  • blahsaysblah - Wednesday, February 3, 2016 - link


    Why wont it die.

    Im pretty sure the dedicated data entry person probably has their own custom numpad device anyway.
  • Kepe - Wednesday, February 3, 2016 - link

    Umm, I use the numpad every day. And I don't do any data entry on excel or something. It is so much better to use the numpad if you need to enter more than one or two numbers somewhere. I would never buy a tenkeyless keyboard.
  • Margalus - Wednesday, February 3, 2016 - link

    If a keyboard doesn't have a numpad it's not worth a plug nickel. Numpad is probably the most used feature when I game.
  • Miau Frito - Wednesday, February 3, 2016 - link

    I use the numpad for movement since it allows my thumb to have easy access to a lot of keys.
    w = /
    a = 7
    s = 8
    d = 9
  • Murloc - Thursday, February 4, 2016 - link

    and how do you use the mouse
  • inighthawki - Thursday, February 4, 2016 - link

    I presume he's either left handed or simply moves the keyboard to the left so that the numpad is at a comfortable position with respect to his hand. I'm not sure what would cause an issue with using the mouse.
  • piroroadkill - Thursday, February 4, 2016 - link

    There are plenty of boards without the numpad. I kind of like the numpad.
  • Samus - Thursday, February 4, 2016 - link

    I have a 10keyless and honestly yes, sometimes I miss the numberpad too.
  • Murloc - Thursday, February 4, 2016 - link

    game trainers and flight simulators make use of it as well.

    Anyway just get a Cooler Master Quickfire Rapid, or even better the Rapid TK which has the right part which can transform in a numberpad should you ever need it, but has the arrow and delete etc. key functions on the same keys too.

Log in

Don't have an account? Sign up now